Installing the RAD-Series RADIUS Server

You will need the RAD-Series RADIUS Server software CD to complete this procedure. You can acquire the software from Interlink Networks, Inc. See: http://www.interlinknetworks.com

To install the RAD-Series RADIUS Server software:

1. Log in as root.
2. Change the directory to the location where the installation binary is located. Run the command:

sh RAD-Series.6.0.solaris.bin

The system asks for the product features to be installed. Select at least the following features:

·    RADIUS Binary Components

·    RADIUS Configuration Files

·    Server Manager

·    Remote Control

3. Enter the binary directory. For example:

/opt/UMC/aaa

4. Enter the configuration directory. For example:

/opt/UMC/aaa/etc

5. When prompted, enter the data directory. For example:

/opt/UMC/aaa/var

6. Enter the documentation directory. For example:

/opt/UMC/aaa/doc

7. Enter the path where you want to install Tomcat. For example:

/opt/UMC/aaa/tomcat

8. When prompted for the shared secret, type:

secret

9. When prompted for the test user password, type:

secret

10. When prompted for the Server Manager user, type:

admin

11. When prompted for the Server Manager password, type:

radius

When the installation is complete, the following lines appears:

Installation Complete

The software has been successfully installed to:

     /opt/UMC/aaa

     /opt/UMC/aaa/etc

     /opt/UMC/aaa/var

     /opt/UMC/aaa/tomcat

     /opt/UMC/aaa/doc

12. To exit the installer, press <Enter>.

Note: See the Interlink Networks RAD-Series RADIUS Server Getting Started Guide for information on configuring the server and verifying the installation. The document is located at: /opt/UMC/aaa/doc/doc/gstarted.pdf.