New Features and Enhancements
This release is intended to work with JUNOSe Releases 7.3.x, 7.2.x, 7.1.x, 7.0.x, and 6.1.x. The following features and enhancements were added to release 7.3.0.
PVS Support
These enhancements have been made to support the NMC-RX Element Management System (EMS) Provisioning Service (PVS):
- PPP interfaces, PPPoE interfaces, and PPPoE subinterfaces are now supported.
- IfAlias parameters (Description and Admin Status fields) are now configurable on IP interfaces.
- New ATM subinterface attributes have been added to support Bridged Ethernet encapsulation types for dynamic interfaces.
- Twenty CORBA clients can be connected simultaneously to PVS.
Creating Multiple VLAN and S-VLAN Services Using the Configuration Wizard
You can rapidly provision large numbers of VLANs and/or S-VLANs by using the VLAN Services Configuration Wizard. The wizard enables you to specify a single set of parameters that can be used for the provisioning of one or more VLAN/S-VLAN stackings.
New Configuration Templates
New templates have been added for the creation of GE interfaces.
Creating Profiles
The NMC-RX application enables you to assign IP, PPP, and Point to Point Protocol over Ethernet (PPPoE) parameters to a profile and associate the profile with an ATM subinterface, PPP interface, or PPPoE interface on an E-series device. This process has been redesigned and made easier to use.
During profile creation, you can now apply the profile on just one device or on all routers being managed by the NMC-RX application.