Fixed Problems
The following problems reported in previous releases have been fixed:
Workaround: After starting a Config Sync Service for the first time, and before performing a device discovery, execute the following command:
chmod -R 777 <local FTP root directory>/<FTP subdirectory>
Note that <local FTP root directory> and <ftp subdirectory> are the directories set during installation.
- If you edit the Integrated Local Management Interface (ILMI) settings (virtual path identifier [VPI] and virtual circuit identifier [VCI]) of an ATM interface while the ILMI Settings Admin Status is set to "Up," an SMNP error occurs.
- Workaround: Before changing VPI and VCI settings, change the ILMI Settings Admin Status to "Down," and click Save. Next, update the VPI and VCI settings, and click Save. Then, change the ILMI Settings Admin Status back to "Up," and click Save.You cannot create Frame Relay major interfaces for devices running JUNOSe release 7.0.0bx. You can create Frame Relay major interfaces for devices running JUNOSe release 7.0.0 or earlier.