Known Problems
This section lists the known problems in release 7.0.0:
- When you use Add/Remove Programs in Windows to remove the Juniper Networks NMC-RX application, all Config Sync Services are also removed. However, entries for the Config Sync Services still appear in the Add/Remove Programs dialog box.
Workaround: Close, then reopen the Add/Remove Programs dialog box to refresh it and confirm that the Config Sync Services entries no longer appear.
- An SNMP error occurs when you try to configure an IP static route and select a nonbroadcast multiaccess (NBMA) or broadcast IP interface as the next hop. Only IP interfaces with a category of point-to-point can be used as the next hop for an IP static route.
- IP interfaces that you choose for any forward or next interface rules within a policy list must exist on the same virtual router. An SNMP error occurs if you add a forward or next interface rule to the policy list that specifies an IP interface from a different virtual router.