Fixed Problems

The following reported problems have been fixed:

• The uninstall program does not remove all registry key items, such as the NMCRX_HOME environment variable. This does not create a problem when you either upgrade or re-install a different version or point release.
• If a value outside the range of 0-65535 is set for the poll frequency on an ATM interface, an SNMP error may occur.
• If you configure a BGP Neighbor after performing an update of the device, the Configured Parameters panel may not display the correct information.
• When creating a BGP Neighbor, default values for many attributes are explicitly set in SNMP even if the user did not explicitly set these values. This results in unwanted configuration parameters being added to the configuration.
• The NMC-RX application enables you to select an IP loopback interface when creating a profile. Once the reference is added to the router using NMC-RX, the profile does not contain the reference to the loopback interface within the router configuration. If you view the profile in NMC-RX after saving it, the reference to loopback is not listed. NMC-RX is not writing this configuration information to the router.
• When viewing or configuring profiles in the NMC-RX application, the parameter ppp chap-challenge-length is missing.