Use the Add Access Method dialog box to add the information you need to connect the JUNOScope software to a router on the network, including an Access Method name for the JUNOScope software, an access method type (SSL or clear-text), and the authentication information name from the JUNOScope software.
Click Settings > Access Methods. Click Add in the Access Methods dialog box.
Access Method Name text box—Type a name for the remote router access method for the JUNOScope software. This is the access method name used in the Add Device dialog box.
Access Method Type drop-down list box—Select a supported access protocol that is configured on the router, either SSL or clear-text.
Authentication Information drop-down list box—Select an authentication name to use for the access method. This is the same name that you created in the Add Authentication Information dialog box.
OK button—Displays the Access Methods dialog box with the new access method displayed.
Cancel button—Clears this dialog box without adding an access method.