Users—Local Authentication—Edit User Dialog Box

Description

Use the Users—Local Authentication—Edit User dialog box to edit user information for accessing the JUNOScope software operations.

Navigation

Click Settings > Users > Local Authentication. Select the user you want to edit in the Users—Local Authentication dialog box, and click Edit.

Permissions

Superuser

Elements

Username text box—Edit the name of the selected user. The username must be
20 characters or less.

Password text box—Type a unique password for the user. The password must be between 3 and 40 characters.

Confirm Password text box—Type the password again to confirm it.

Permissions list box—Select the permission or access privileges for the user for JUNOScope software operations. Click the down-arrow to display the available options: superuser, read-write, and read-only.

No user privilege level is required to perform network planning tasks for the JUNOScope software. Planning tasks can be performed in the network operations center (NOC) by a network designer or engineer. These network planning tasks include the following:

• Determine which routers to connect to and manage
• Determine which users can access and use the software, and their permission levels
• Configure the JUNOS software on each router for the supported JUNOScript access protocols
• Configure the JUNOS software on each router for a digital certificate for the JUNOScript server
• Configure the JUNOS software on each router for each user you want to use the JUNOScope software
• Determine how often you want archive operations to occur on routers

The following table summarizes the tasks and privilege levels required to use the JUNOScope software.

Required JUNOScope Software Tasks and Privilege Levels

JUNOScope Software Task	Superuser	Read-Write	Read-Only
Installation
Install, reinstall, upgrade, or downgrade JUNOScope software	X	—	—
Looking Glass	X	X	X
Configuration Management
Configuration Browser (Current > View)	X	X	X
Configuration Editor (Current > Edit)	X	X	—
Archive (Repository > Archive)	X	X	—
Import (Repository > Import)	X	X	—
Compare (Repository > Compare)	X	X	X
Display (Repository > Display)	X	X	X
Restore (Repository > Restore)	X	X	—
Inventory Management	X	X	X
Scan Inventory (Inventory Management > Scan)	X	X	—
Reports—View and generate (Inventory Management > Reports)	X	X	X Cannot save or delete custom reports
Demo Reports—View and generate (Inventory Management > Reports > Demo)	X	X	X Cannot save or delete custom reports
Repository Schedule and save custom inventory reports View archived reports that have run	X X	X X	— —
Software Manager
Images	X	—	—
Monitor
Operations	X	X	X Cannot delete operations
Status	X	X	X
Audit Log	X	—	—
Settings
Authentication Information	X	—	—
Access Methods	X	—	—
Devices	X	—	—
Groups	X	—	—
Labels	X	—	—
Schedules	X	—	—
Users >Local Authentication	X	—	—
Users > Authentication Policy	X	—	—
Import/Export Data	X	—	—
RADIUS Configuration	X	—	—
Saved Operations (Task Manager)	X	X	—

OK button—Adds the edited user information to the JUNOScope software database. The Users—Local Authentication dialog box redisplays with the edited username and permissions.

Cancel button—Clears this dialog box without changing user information and redisplays the JUNOScope main window.