Devices—Edit Device Dialog Box

Description

Use the Edit Device dialog box to edit router information stored in the database. You can edit the router name, Domain Name System (DNS) name or IP address, access method, model, and comment.

Navigation

Click Settings > Devices. Select the device that you want to edit in the Devices dialog box, and click Edit.

Permissions

Superuser

Elements

Device Name text box—Type a name for the router for the JUNOScope software. The router name must be 40 characters or less.

DNS Name or IP Address text box—Type a DNS name or IP address for the router you want to add.

Access Method drop-down list box—Select the remote access method (SSL or clear-text) for connecting to the router. Click the down arrow to display the available options.

Model drop-down list box—Select the router model. Click the down arrow to display the available device model options.

Labels check boxes—Lists existing labels by category in the bottom area of the dialog box. All labels with no specified category are displayed under the category Miscellaneous. Click one or more label check boxes to associate the device with an existing label. A label is used to statically group multiple devices so that JUNOScope operations, such as archive and inventory scan, can be performed on them. You create labels using the Settings > Labels command. If no labels are configured, no labels are listed in this dialog box.

Comment text box—Type an optional descriptive comment about the router that you want to add. The comment must be 40 characters or less.

OK button—Adds the edited router information to the JUNOScope software database. The router is listed in the Devices dialog box.

Cancel button—Clears this dialog box and redisplays the Devices dialog box.