Use the Add RADIUS Configuration dialog box to add or copy a RADIUS server configuration to the JUNOScope software database. To save a copied RADIUS configuration, you must change either the RADIUS server DNS name or IP address and port number.
Click Settings > RADIUS Configuration. Then, click Add or Copy in the RADIUS Server Configuration dialog box.
RADIUS Server DNS Name or IP Address text box—Type the DNS name or IP address of the RADIUS server. The name must be less than 40 characters.
RADIUS Authentication Port No. text box—Type a unique port number for the RADIUS server. The default value for this field is 1812. The port number value must be between 1 and 65,535. The RADIUS server DNS name or IP address and port number combination must be unique to the system.
RADIUS Accounting Port No. text box—(This text box is disabled until you enable the RADIUS accounting port.) Type the RADIUS accounting port in the text box. The accounting port is the port from which the JUNOScope software maintains a record of the loggable activities a user has performed. The default port number is 1813. The port number value must be between 1 and 65,535. The RADIUS Accounting port number is optional. If the RADIUS Accounting port is disabled, the RADIUS Accounting Port No. column displays DISABLED in the RADIUS Configuration Entry table.
Enable RADIUS Accounting Port? check box—Click the check box to enable the specified RADIUS accounting server port. This action enables the RADIUS Accounting Port No. text box.
RADIUS Server Secret text box—Type the RADIUS server secret. The secret must be less than 47 characters.
Confirm RADIUS Server Secret text box—Retype the RADIUS server secret to confirm it.
OK button—Adds the RADIUS configuration entry to the JUNOScope software database and redisplays the RADIUS server Configuration dialog box with the new RADIUS server DNS name or IP address and RADIUS server port number listed in the table.
Cancel button—Clears this dialog box without adding a new RADIUS configuration entry.