Performing the LSP Ping Diagnostic Test on a Layer 2 circuit
Pseudowire
To perform the LSP ping diagnostic test on a Layer 2 circuit
pseudowire, follow these steps:
In the JUNOScope main window, click Provisioning > Diagnostics
> LSP Ping > L2Circuit. The Filter Pseudowires dialog box opens.
To view all the pseudowires provisioned by JUNOScope,
select All Pseudowires:.
Select the device or group of devices whose pseudowire
you want to test, from the Select Device Groups or Select
Devices list box. Shift-click to select multiple devices.
Select the Select Pseudowire Endpoints button
and select the endpoints of the pseudowires you want to test from
the two lists.
Enter a value in the Virtual Circuit ID field
to view the details of all the Layer 2 circuit pseudowires that have
that virtual circuit ID.
Click Filter. The Select L2circuit Pseudowires
dialog box displays all the pseudowires that match the criteria that
you specified in the previous step.
Select the pseudowires whose operation you want to test
and click Run Command. The Diagnostics dialog box displays
a success or a failure message depending on the operational status
of the pseudowire.
Performing the LSP Ping Diagnostic Test on a Layer 2 VPN Pseudowire
To perform the LSP Ping diagnostic test on a Layer 2 VPN pseudowire,
follow these steps:
In the JUNOScope main window, click Provisioning > Diagnostics
> LSP Ping > L2Vpn. The Filter Pseudowires dialog box opens.
To view all the pseudowires provisioned by JUNOScope,
select All Pseudowires:.
Select the device or group of devices whose pseudowire
details you want to view, from the Select Device Groups
or Select Devices list box. Shift-click to select multiple
devices.
Select the Select Pseudowire Endpoints button
and select the endpoints of the pseudowires whose details you want
view from the two lists.
Enter a value in the VPN Name:, Site Name: , and Site Id: fields to view the details of all the Layer
2 VPN pseudowires that have those values.
Click Filter. The Select L2vpn Pseudowires dialog
box opens. This dialog box displays all the pseudowires that match
the criteria that you specified in the previous step.
Select the pseudowires whose operation you want to test,
and click Run Command. The Diagnostics dialog box displays
a success or a failure message depending on the operational status
of the pseudowire.
