This section describes the JUNOScope software system log messages.
Audit Log Message
JUNOScope started: server address: '<server_ address' https port no: '<https port no>' time: '<time when junoscope started>
System Log Message
JUNOSCOPE_STARTUP
JUNOScope started:
server address: '<server address>' https port no: '<https port
no>' time: '<time when JUNOScope started' by username: '<user
name> 'client address: '<client address>'
Description
The JUNOScope software was started.
RADIUS Attributes
Type
Event
Severity
Info
Audit Log Message
JUNOScope shutdown: server address: '<server_ address' https port no: '<https port no>' time: '<time when junoscope started>'
System Log Message
JUNOSCOPE_SHUTDOWN:
JUNOScope shutdown: server
address: '<server address>' https port no: '<https port no>'
time: '<time when JUNOScope started>' by username: '<user name>'
client address: '<client address>'
Description
The JUNOScope software was shut down.
RADIUS Attributes:
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_LOGIN_FAILURE:
Failed
to login: username: '<user name>' client address: '<client address>'
Description
The user failed to login because of an invalid username or password.
RADIUS Attributes
(For RADIUS, this is implemented as two messages: a session start followed immediately by a session end.)
Type
Error
Severity
Error
Action
Contact the system administrator.
System Log Message
JUNOSCOPE_LOGIN_SUCCESSFUL:
User
logged in: username: '<user name>' client address: '<client
address>'
RADIUS Attributes
(For RADIUS, this is implemented as two messages: a session start followed immediately by a session end.)
Type
Error
Severity
Error
Action
Contact the system administrator.
RADIUS Attributes
(For RADIUS, this is implemented as two messages: a session start followed immediately by a session end.)
Type
Error
Severity
Error
Action
Contact the system administrator.
Description
A user successfully logged in.
RADIUS Attributes
Acct-Status-Type: Start
Juniper-JUNOScope-Client
Address: <client address>
Type
Event
Severity
Info
Audit Message
User logged in.
System Log Message
UNOSCOPE_LOGOUT:
User logged out:
username: '<user name>' client address: '<client address>'J
Description
A user logged out.
RADIUS Attributes
Acct-Status-Type: Stop
Juniper-JUNOScope-Client
Address: <client address>
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_SESSION_TIMEOUT:
User
session timed out: username: '<user name>' client address: '<client
address>'
Description
A user successfully logged in.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
User locked: username: “ <user name>’
System Log Message
JUNOSCOPE_USER_AUTO_LOCKED:
User
locked: username: '<user name>' client address: '<client address>'
Description
A user is automatically locked from logging in to the JUNOScope software because the number of consecutive login failure attempts within the configured Access Window equals the Maximum Login Attempts value.
RADIUS Attributes
(For RADIUS, this event is implemented as two messages: a session start followed immediately by a session end.)
Type
Event
Severity
Info
Audit Message
User locked: username: ‘<user name>’ by user: ‘<admin user name>’
System Log Message
JUNOSCOPE_USER_LOCKED_BY_ADMIN:
User
locked: username: '<user name>' client address: '<client address>'
by user:'<admin user name>
Description
A user is locked from logging in to the JUNOScope software by the administrator using the Authentication Policy user interface.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
User unlocked: username: ‘<user name>’ by user: ‘<admin user name>’
System Log Message
JUNOSCOPE_USER_LOCKED_BY_ADMIN:
User
unlocked: username: '<user name>' client address: '<client address>'
by user:'<admin user name>
Description
A user is unlocked from logging in to the JUNOScope software by the administrator using the Authentication Policy user interface.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Global policy changed.
System Log Message
JUNOSCOPE_GLOBAL_POLICY_CHANGED:
Global Policy
Changed.
Description
The global policy changed.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
User created: user: ‘<new user name>’
System Log Message
JUNOSCOPE_USER_CREATED:
User created:
user: '<new user name>' by username: '<user name>' client address:
'<client address>'
Description
A new user was created.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
User deleted: user: ‘<deleted user name>’
System Log Message
JUNOSCOPE_USER_DELETED:
User deleted:
user: '<deleted user name>' by username: '<user name>' client
address: '<client address>'
Description
A user was deleted.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Password changed: user: ‘<user name>’
System Log Message
JUNOSCOPE_USER_PASSWORD_CHANGED:
Password changed: user: '<user name>' by username: '<user name>'
client address: '<client address>'
Description
A user's password was changed.
RADIUS Attributes
Type
Event
Severity
Info
Audit Log Message
User group created: user group: '<user group name>'
System Log Message
JUNOSCOPE_USERGROUP_CREATED
User
group created: user group: '<user group name' by username: '<user
name>' client address: '<client address>'
Description
A new user group has been created.
Audit Message
User group permission changed: user group name: '<user group_name>'
System Log Message
JUNOSCOPE_USERGROUP_PERM_CHANGED
User group permission changed: user group name: '<user group name>'
by username: '<user name>' client address: '<client address>'
RADIUS Attributes
Type
Event
Severity
Info
Description
The user group permission has changed.
RADIUS Attributes
Type
Event
Severity
Info
Audit Log Message
User group deleted: user group name: '<user group_name>'
System Log Message
JUNOSCOPE_USERGROUP_DELETED
User
group deleted: user group name: '<user group name>' by username:
'<user name>' client address: '<client address>'J
Description
The user group has been deleted.
RADIUS Attributes
Type
Event
Severity
Info
Audit Log Message
User group to user association added/removed: user group name: '<user group_name>' user name: '<association changed user name>'
System Log Message
JUNOSCOPE_USERGROUP_USER_ASSOC_CHANGED
User group to user association added/removed: user group name:
'<user group name>' username: '<association changed user name>'
by username: '<user name>' client address: '<client address>'
Description
The user group to user association has been either removed or added.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
RADIUS configuration added: RADIUS server address: '<RADIUS server address>’
System Log Message
JUNOSCOPE_RADIUS_CONFIG_ADDED:
RADIUS configuration added: RADIUS server address: <RADIUS server
address> client address: ‘< client address> ’
Description
A new RADIUS configuration entry was added.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
RADIUS configuration changed: RADIUS server address: '<RADIUS server address>’
System Log Message
JUNOSCOPE_RADIUS_CONFIG_CHANGED:
RADIUS configuration changed: RADIUS server address: <RADIUS server
address> client address: ‘< client address>’
Description
An existing RADIUS configuration entry was edited.
RADIUS Attributes:
Type
Event
Severity
Info
Audit Message
RADIUS configuration deleted: RADIUS server address: '<radius server address>'
System Log Message:
JUNOSCOPE_RADIUS_CONFIG_DELETED:
RADIUS configuration deleted: RADIUS server address:<RADIUS server
address> client address: ‘< client address>’
Description
An existing RADIUS configuration entry was deleted.
RADIUS Attributes:
Type
Event
Severity
Info
Audit Message
Authentication information changed: name: ‘<authentication information name>’
System Log Message
JUNOSCOPE_AUTH_INFO_CHANGED:
Authentication
information changed: name: '<auth info name>' by username: '<user
name>' client address: '<client address>'
Description
Device authentication information was changed.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Access method changed: name: access method: ‘<access method name>’
System Log Message
JUNOSCOPE_ACCESS_METHOD_CHANGED:
Access method changed: access method: '<access method name>' by
username: '<user name>' client address: '<client address>'
Description
An access method was changed.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Label association added/removed: label: ‘<Label name>’ device: ‘<device name>’
System Log Message
JUNOSCOPE_LABEL_ASSOC_CHANGED:
Label
associations changed: label: '<label name>' by username: '<user
name>' client address: '<client address>'
Description
The devices associated with a label were changed.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Commit done on device <device name>
System Log Message
JUNOSCOPE_COMMIT_PERFORMED:
Commit
performed: device: '<device name>' by username: '<user name>'
client address: '<client address>'
Description
A user committed a configuration on a device.
RADIUS Attributes
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_ARCHIVE_CONNECTION_ERROR:
Could not connect to device: '<device name>' operation name: '<operation
name>' operation type: '<operation type>' username: '<username>'
start time:'<start time>' last updated time: '<last updated
time>'
Description
An archive operation failed because the connection could not be established with the device.
Type
Error
Severity
Error
Action
Contact System Administrator
System Log Message
JUNOSCOPE_ARCHIVE_NO_ACCESS_INFO_ERROR:
Could not find access information for device: '<device
name>' operation name: '<operation name>' operation type: '<operation
type>' username: '<username>' start time:'<start time>' last
updated time: '<last updated time>'
Description
An archive operation failed because no access information for the device was found.
Type
Error
Severity
Error
Action
Contact System Administrator
System Log Message
JUNOSCOPE_ARCHIVE_NO_CHANGE:
No change in configuration for device: '<device name>'
operation name: '<operation name>' operation type: '<operation
type>' username: '<username>' start time:'<start time>' last
updated time: '<last updated time>'
Description
No change in the configuration was found after the last archive.
Type
Event
Severity
Info
Audit Message
Successfully archived device: '<device name>' revision: '<revision>'
System Log Message
JUNOSCOPE_ARCHIVE_SUCCESS:
Successfully
archived device: '<device name>' revision: '<revision>' operation
name: '<operation name>' operation type:'<operation type>' username:
'<username>' start time:'<start time>' last updated time: '<last
updated time>'
Description
A user successfully archived a device configuration.
RADIUS Attributes
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_ARCHIVE_SYSTEM_ERROR:
A System error occurred during archive operation for
device: '<device name>' operation name: '<operation name>' operation
type: '<operation type>' username: '<username>' start time:'<start
time>' last updated time: '<last updated time>'
Description
An archive operation failed because a system error occurred.
Type
Error
Severity
Error
Action
Contact System Administrator
System Log Message
JUNOSCOPE_SCAN_CONNECTION_ERROR:
Could not open connection to device: '<device name>' operation
name: '<operation name>' operation type: '<operation type>'
username: '<username>' start time:'<start time>' last updated
time: '<last updated time>'
Description
An Inventory Management System scan operation failed because a connection could not be established with the device.
Type
Error
Severity
Error
Action
Contact System Administrator
System Log Message
JUNOSCOPE_SCAN_NO_ACCESS_INFO_ERROR:
Could not find access information for device: '<device
name>' operation name: '<operation name>' operation type: '<operation
type>' username: '<username>' start time:'<start time>' last
updated time: '<last updated time>'
Description
An Inventory Management System scan failed because no access information for the device was found.
Type
Error
Severity
Error
Action
Contact System Administrator
System Log Message
JUNOSCOPE_SCAN_NO_CHANGE:
No change in inventory database for device: '<device name>' operation
name: '<operation name>' operation type: '<operation type>'
username: '<username>' start time:'<start time>' last updated
time: '<last updated time>'
Description
No change in inventory was found after the last scan.
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_SCAN_SUCCESS:
Successfully scanned items into inventory database for device: '<device
name>' operation name: '<operation name>' operation type: '<operation
type>' username: '<username>' start time:'<start time>' last
updated time: '<last updated time>'
Description
A device was successfully scanned.
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_SCAN_SYSTEM_ERROR:
A System
error occurred during inventory scan operation for device: '<device
name>' operation name: '<operation name>' operation type: '<operation
type>' username: '<username>' start time:'<start time>' last
updated time: '<last updated time>'
Description
An Inventory Management System scan operation failed because a system error occurred.
Type
Error
Severity
Error
Action
Contact System Administrator
System Log Message
JUNOSCOPE_REPORT_SUCCESS:
Successfully
generated report: '<report name>' username: '<username>'
Description
A custom report is successfully archived
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_REPORT_ERROR:
Error while
generating report: '<report name>' username: '<username>'
Description
Failed to archive a custom report
Type
Error
Severity
Error
Action
Contact System Administrator
System Log Message
JUNOSCOPE_RESTORE_CONNECTION_ERROR:
Could not open connection to device: '<device name>'
operation name: '<operation name>' operation type: '<operation
type>' username: '<username>' start time:'<start time>' last
updated time: '<last updated time>'
Description
A restore configuration operation failed because a connection could not be established with the device.
Type
Error
Severity
Error
Action
Contact System Administrator
System Log Message
JUNOSCOPE_RESTORE_NO_ACCESS_INFO_ERROR:
Could not find access information for device: '<device
name>' operation name: '<operation name>' operation type: '<operation
type>' username: '<username>' start time:'<start time>' last
updated time: '<last updated time>'
Description
A restore operation failed because no access information for the device was found.
Type
Error
Severity
Error
Action
Contact System Administrator
Audit Message
Successfully restored device: '<device name>’
System Log Message
JUNOSCOPE_RESTORE_SUCCESS:
Successfully
restored configuration for device: '<device name>' operation name:
'<operation name>' operation type: '<operation type>' username:
'<username>' start time:'<start time>' last updated time: '<last
updated time>'
Description
A user successfully restored a configuration to a device.
RADIUS Attributes
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_RESTORE_SYSTEM_ERROR:
A System error occurred during restore operation for device: '<device
name>' operation name: '<operation name>' operation type: '<operation
type>' username: '<username>' start time:'<start time>' last
updated time: '<last updated time>'
Description
A restore operation failed because a system error occurred.
Type
Error
Severity
Error
Action
Contact System Administrator
Audit Message
Device added: device: '<device name>’
System Log Message
JUNOSCOPE_DEVICE_ADDED:
Device added:
device: '<device name>' by username: '<user name>' client address:
'<client address>'
Description
A new device was added.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Device added: device: '<device name>’
System Log Message
JUNOSCOPE_DEVICE_CHANGED:
Device
changed: device: '<device name>' by username: '<user name>'
client address: '<client address>'
Description
The device setup information has changed.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Device deleted: device: '<deleted device name>’
System Log Message
JUNOSCOPE_DEVICE_DELETED:
Device
deleted: device: '<device name>' by username: '<user name>'
client address: '<client address>'
Description
A device was deleted.
RADIUS Attributes
Type
Event
Severity
info
Audit Message
Successfully installed image ‘<target version>’ on ‘<router>’
System Log Message
JUNOSCOPE_SOFTWARE_IMAGE_INSTALL
Successfully installed image ‘<target-version>’ on
‘<router>’
Description
A software image was successfully installed on a device.
RADIUS Attributes
Type
Event
Severity
info
System Log Message
JUNOSCOPE_SOFTWARE_IMAGE_INSTALL_ERROR
Installation failed: software ‘<package-info>’
is running instead of expected ‘<target-version>’ on
‘<hostname>’
Description
A software image installation failed.
Type
Event
Severity
Error
Action
Contact system administrator
Audit Message
Successfully downloaded image ‘<image-name> to target ‘router>’
System Log Message
JUNOSCOPE_SOFTWARE_IMAGE_DOWNLOAD
Successfully downloaded image ‘<image-name>’ to target
‘<router>’
Description
A software image has been downloaded on a device.
RADIUS Attributes
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_SOFTWARE_IMAGE_DOWNLOAD_ERROR
Download failed for image ‘<image-name>’
Description
A software image download failed.
Type
Event
Severity
Error
Action
Contact system administrator
System Log Message
JUNOSCOPE_SOFTWARE_IMAGE_IMPORT
Successfully imported image %image by user %username
Description
A software image was successfully imported.
RADIUS Attributes
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_SOFTWARE_IMAGE_IMPORT_ERROR
Import failedI
Description
A software image import failed.
RADIUS Attributes
Type
Event
Severity
Error
Action
Contact system administrator
System Log Message
JUNOSCOPE_SOFTWARE_IMAGE_DELETE
User %username deleted image %image
Description
A user deleted a software image.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Purging Audit Log records. No. of records purged: '<No. of auditlog records purged>' comment: '<comment >' Username: '<user name>' Time:'<date and time when the event occurred>'
System Log Message
JUNOSCOPE_PURGE_AUDITLOG
Purging
Audit Log records. No. of records purged: '<No. of auditlog records
purged>' comment: '<comment >' Username: '<user name>' Time:'<date
and time when the event occurred>'
Description
Purging Audit Log records.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Purging Status Log records. No. of records purged: '<No. of status records purged>' comment: '<comment >' Username: '<user name>' Time:'<date and time when the event occurred>'
System Log Message
JUNOSCOPE_PURGE_STATUS:
Purging
Status records. No. of records purged: '<No. of status records
purged>' comment: '<comment >' Username: '<user name>' Time:'<date
and time when the event occurred>'
Description
Purging status records.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
There are difference for device: '<device name>' revisions '<revision1>' and '<revision2>'
System Log Message
JUNOSCOPE_CONFIG_AUDIT_DIFFERENCE
Difference(s) found in configuration revisions <revision1> and
<revision2> for device: <device> operation name: <operation_name>
operation type: <operation_type> username:<username> start time:
<start_time> last modified time: <last_modified>
Description
Config Audit: Differences found.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
There are difference for device: '<device name>' revisions '<revision1>' and '<revision2>'
System Log Message
JUNOSCOPE_CONFIG_AUDIT_NO_DIFFERENCE:
No difference in configuration revisions <revision1> and
<revision2> for device: <device> operation name: <operation_name>
operation type: <operation_type> username:<username> start time:
<start_time> last modified time: <last_modified>
Description
Config Audit: No differences found.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Difference(s) found between partial configuration<partial Config> revision: <revision>and running configuration on device: <device>done by username: <username>client address: <client_address>
System Log Message
JUNOSCOPE_PARTIAL_CONFIG_AUDIT_DIFF:
Difference(s) found between partial configuration<partial
Config> revision: <revision>and running configuration on device:
<device>done by username: <username>client address: <client_address>
Description
Partial Config Audit: Differences Found.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
No difference(s) found between partial configuration<partial Config> revision: <revision>and running configuration on device: <device>done by username: <username>client address: <client_address>
System Log Message
JUNOSCOPE_PARTIAL_CONFIG_AUDIT_NO_DIFF:
No difference(s) found between partial configuration<partial
Config> revision: <revision>and running configuration on device:
<device>done by username: <username>client address: <client_address>
Description
Partial Config Audit: No differences Found.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Export devices to user: '%username' client address:'%client_address'
System Log Message
Export devices to user: '%username' client address: '%client_address'
Description
All JUNOScope managed devices are exported to PvS Gateway.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Successfully uploaded PvS bundle %filename by user %username
System Log Message
Successfully uploaded PvS bundle %filename by user %username
Description
A PvS bundle is uploaded into the JUNOScope repository.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Upload failed: %message
System Log Message
Upload failed: %message
Description
A PvS bundle failed to upload into the JUNOScope repository.
RADIUS Attributes
Type
Event
Severity
Error
Audit Message
Successfully installed PvS bundle on target %device
System Log Message
Successfully installed PvS bundle on target %device
Description
A PvS bundle is installed successfully on the device.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Installation failed for PvS bundle %bundlename
System Log Message
Installation failed for PvS bundle %bundlename
Description
A PvS bundle failed to install.
RADIUS Attributes
Type
Event
Severity
Error
Audit Message
Successfully uninstalled PvS bundle on target %device
System Log Message
Successfully uninstalled PvS bundle on target %device
Description
A PvS bundle is uninstalled successfully on the device
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
PvS bundle uninstallation failed on target %device
System Log Message
PvS bundle uninstallation failed on target $device
Description
The PvS bundle failed to uninstall.
RADIUS Attributes
Type
Event
Severity
Error
Audit Message
Successfully updated archive sites on target %device
System Log Message
Successfully updated archive sites on target %device
Description
PvS archive locations are successfully configured on device.
RADIUS Attributes
Type
Event
Severity
Info
Audit Message
Update archive sites failed for reason: %reason
System Log Message
Update archive sites failed for reason: %reason
Description
PvS archive locations failed to configure on devices.
RADIUS Attributes
Type
Event
Severity
Error
System Log Message
JUNOSCOPE_CONFIG_ASSOCIATED: Config Associated
Config Name= ’<Config Name>’
Version= ’<Config Version>’
Criteria= ’<Criteria Used>’
Time: ’<time>’
RADIUS Attributes
Description
A configuration file was associated for a criteria.
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_CONFIG_ASSOCIATION_DELETED: Config Association Deleted
Config Name= ’<Config Name>’
Version= ’<Config Version>’
Criteria= ’<Criteria>’
Time: ’<time>’
RADIUS Attributes
Description
A configuration file association was deleted
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_CONFIG_ASSOCIATION_REORDERED: Config Association Reordered
Time: ’<time>’
RADIUS Attributes
Description
The order of the configuration file associations in the list was changed
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_CONFIG_RETURNED: Config Returned
Device Attributes= Hostname: <hostname> Serial Number: <Serial No.> Model: <model> OS Version: <os version>
Configuration= ’<name> <version>’
Time: ’<time>’
RADIUS Attributes
Description
A configuration file was returned in response to a request from the device
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_NO_CONFIG_ASSOCIATED: Association not found
Device Attributes= Hostname: <hostname> Serial Number: <Serial No.> Model: <model> OS Version: <os version>
Time: ’<time>’
RADIUS Attributes
Description
No configuration file association was found for the device attributes
Type
Event
Severity
Info
System Log Message
JUNOSCOPE_RETURN_LATEST_ARCHIVED_CONFIG: Return latest configuration archived from device option is %set. Username: ’%username’ Time: ’%time’
Time: ’<time>’
RADIUS Attributes
Description
The return latest configuration archived option was set.
Type
Event
Severity
Info
