[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
Configuring Archive Locations
You can create up to five archive locations for
a device group.
To configure a new archive location, follow these steps:
- Click Settings > Organizations. The Organizations
table appears.
- Create an organization or view the details of an existing one.
Either click Add New or click the organization name link˙. Either
the Organization Credentials page appears for you to create a new
organization. Click Save Changes. The Device Groups and Alert Registration
tables appear. Or, click the organization name link. The Organization
Details page, the Device Groups, and the Alert Registration tables
appear.
- In the Organization Device Group table, click Add New. The Device
Group page appears with the Archive Locations table (for more information
about the Archive Locations, table, see Configuring Archive Locations).
- On the Device Group page, click Add New in the Archive Locations
table. A new row appears in the Archive Locations table.
- Type the required information in the Archive Locations table
column fields. See Archive Locations Table Description. The archive location
directory should be used exclusively for JMBs and no other AIM files.
- Click Test Access. The test results appear in the
Test Results field. The test results are either Success or Failure.
- Click Save Changes at the top of the Device Groups
page. This command saves the device group parameters and the archive
locations.
If you specify an AI-Script install package, that
package is automatically installed on all the devices in the group
that were imported from JUNOScope,
Archive Locations Table Description
Table 37 defines the Archive
Locations table command columns.
Table 37: Archive Locations
Table Command Button Descriptions
Button Name
|
Description
|
Privileges
|
Enabled/Disabled
|
Results
|
Test Access
|
Tests access to the archive pathname specified in the Local
Location field.
|
AIM Admin Settings
|
Enabled when you select an archive location in the Archive Location
table.
|
- Successfully accessed location.
- Failed to access location.
|
Add New
|
Adds a new row in the Archive Location table.
|
AIM Admin Settings
|
Always enabled
|
Adds new row for a new archive location in the table.
|
Delete
|
Removes the selected archive location.
|
AIM Admin Settings
|
Enabled when you select an archive location row in the Archive
Location table.
|
Removes an archive location row in the table.
|
Table 38 defines the Archive
Locations table fields.
Table 38: Archive Location
Table Field Descriptions
Name
|
Description
|
Privileges
|
Range/Length
|
Default
|
Local Location
|
The name of the local path where the device sends incident and
intelligence JMBs. This path is relative to the installation machine.
Note:
The archive location directory should be used exclusively for
JMBs and no other AIM files.
|
AIM Admin Settings
|
128 characters
|
Blank
|
Test Results
|
Displays results from the Test Access command for this row.
The test results are either:
- Successfully accessed location.
- Failed to access location.
|
Not allowed to modify
|
N/A
|
Blank
|
Upload Command
|
Command that will be specified to set the archive location on
the JUNOS devices. This command will be used to transfer the JMB files
to the archive location.
|
AIM Admin Settings
|
128 characters
|
Blank
|
Password
|
Password that will be used by the JUNOS devices when they run
the upload command to transfer the JMB files to the archive location.
|
AIM Admin Settings
|
64 characters
|
Blank
|
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
