JUNOScope Settings allow the AIM application to
integrate with the JUNOScope software Script Management feature to
automatically install a script bundle (also known as an AI-Script
install package) on multiple devices at once.
JUNOScope Settings include the following information:
URL used to connect AIM to the JUNOScope software
Username and password of JUNOScope AIM user with read-write
privileges
IP address used by the device to download script bundles
from JUNOScope if DNS is disabled on the device
The AIM administrator must set up JUNOScope Settings
before devices can be imported from JUNOScope. Devices appear in the
Devices table when you click Import JUNOScope devices in the Devices
Managed by JUNOScope table.
The AIM administrator can import all devices that
are managed by the JUNOScope software. Only devices imported from
JUNOScope will have JUNOScope Script Management capabilities, which
include:
Automatically installing a script bundle on one or more
devices in a device group.
Ensuring that AIM archive locations for all devices in
the device group are synchronized.
To configure JUNOScope Settings, follow these steps:
In the AIM navigation pane, click General > JUNOScope
Settings. The JUNOScope Settings page appears. The JUNOScope Settings
page has two sections: JUNOScope Settings and Devices Managed by JUNOScope.
In the Devices Managed by JUNOScope table, click JUNOScope
Devices. This action imports devices managed by JUNOScope into the
AIM software. Any devices managed by the JUNOScope software are added.
The JUNOScope software can install script bundles automatically to
these devices. See Devices Managed by JUNOScope Table Description.
JUNOScope Settings Table Description
Table 15 describes the JUNOScope
Settings command buttons.
Table 15: JUNOScope
Settings Command Buttons
Button Name
Description
Privileges
Enabled/Disabled
Results
Save Settings
First tests the connection to JUNOScope. If connection is successful,
any modified parameters are saved.
AIM Admin Settings
Enabled if admin privileges
Displays the test results of the AIM connection to JUNOScope
in the Test Results field: Successfully connected to JUNOScope server
or
An error message appears if settings are not saved.
Test Connection to JUNOScope
Uses the values in the JUNOScope settings fields to test the
AIM connection to JUNOScope.
None
Always enabled
Displays test results of the AIM connection to JUNOScope in
the Test Results field.
Table 16 describes the JUNOScope
Settings table fields.
URL used to communicate with JUNOScope. Required for Script
Bundle functionality
AIM Admin Settings
128 characters
Blank
JUNOScope Username
Log in ID to use for AIM communications with JUNOScope. This
is the AIM user with read-write privileges created in the JUNOScope
software. This setting is required for Script Bundle functionality
AIM Admin Settings
32 characters
Blank
JUNOScope Password
Password to use with the username
AIM Admin Settings
32 characters
Blank
Confirm JUNOScope Password
Password to type again for confirmation. The password must match
the one in the password field
AIM Admin Settings
32 characters
Blank
IP Address for Device to JUNOScope FTP Connectivity
IP Address that the JUNOS devices use to transfer the Script
Bundle from the JUNOScope server by way of FTP if DNS is not enabled
on the device
AIM Admin Settings
32 characters
Blank
Test Results
Displays results from the Test Connection to JUNOScope command
Not allowed to modify
N/A
Blank
Devices Managed by JUNOScope Table Description
Table 17 describes the Devices
Managed by JUNOScope table command button.
Table 17: Devices Managed
by JUNOScope Command Button
Button Name
Description
Privileges
Enabled/Disabled
Results
Import JUNOScope Devices
Request sent to JUNOScope to retrieve all the devices it manages
and saves them in the AIM database
AIM Admin Settings
Enabled if you specify JUNOScope settings
Displays the devices imported from JUNOScope in the table.
Table 18 describes the Devices
Managed by JUNOScope table fields.
Table 18: Devices Managed
by JUNOScope Parameter Descriptions
Name
Description
Privileges
Range/Length
Default
Device Name
Name JUNOScope user assigned this device.
Not allowed to modify
N/A
N/A
Host Name
Identifier used for network communication between JUNOScope
and the JUNOS device. For example, it can be a hostname (host-name.juniper.net)
or an IP address.
Not allowed to modify
N/A
N/A
Advanced Insight Manager Device Group
The AIM device group to which this device belongs. For information
about setting up AIM device groups, see Creating Device Groups.
