[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

AIM System Requirements

You can install the AIM application on a Sun Solaris or Red Hat Enterprise Edition Linux server. Ensure that the server on which you install the AIM application meets the minimum . For a Sun Solaris server, see Table 11. For a Linux server, see Table 12.

Sun Solaris Server System Minimum Requirements

Before you install the AIM application on a Sun Solaris server, ensure that the server meets the minimum requirements shown in Table 11.

Table 11: AIM Minimum Sun Solaris Server

System

Minimum Requirement

Operating system

Solaris 9.0 or later

NOTE: GNU Privacy Guard (GPG) is required to be installed.

Processor

UltraSPARC III or equivalent

Speed

1.3 GHz or faster

RAM

1 gigabyte (GB)

Free disk space

Follow these guidelines for disk space allocation:

  • Up to 100 devices under management: Allocate at least 20 GB for archive location and at least 20 GB for AIM application (at least 40 GB if archive location is a local drive on the AIM server)
  • Between 100-1000 devices under management: Allocate at least 50 GB for archive location and at least 50 GB for AIM application (at least 100 GB if archive location is a local drive on the AIM server)
  • More than 1000 devices under management: Contact your Juniper Networks J-Care Technical Service representative

Red Hat Linux Server System Minimum Requirements

Before you install the AIM application software on a Linux server, ensure that the server meets the minimum requirements shown in Table 12.

Table 12: AIM Minimum Linux Server

System

Minimum Requirement

Hardware

Red Hat certified hardware platforms

Operating system

Red Hat Enterprise Linux ES version 3 and 4

Processor

Pentium 4 processor

Speed

2.8 GHz or faster

RAM

1 GB

Free disk space

Follow these guidelines for disk space allocation:

  • Up to 100 devices under management: Allocate at least 20 GB for archive location and at least 20 GB for AIM application (at least 40 GB if archive location is a local drive on the AIM server)
  • Between 100-1000 devices under management: Allocate at least 50 GB for archive location and at least 50 GB for AIM application (at least 100 GB if archive location is a local drive on the AIM server)
  • More than 1000 devices under management: Contact your Juniper Networks J-Care Technical Service representative
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]