This chapter provides the information the AIS administrator needs to plan, design, and install the Advanced Insight Solutions (AIS) system successfully on the network. The AIS system elements that need installation and set up include:
Figure 7 shows the sequence of key steps necessary to install and set up AIS.
Figure 7: AIS Installation Sequence
 |
Note: It does not matter whether AI-Scripts or AIM is installed first. However, for both, it is necessary, to know the archive location (archive-site destination) used for devices to send incident and intelligence JMBs and for AIM to retrieve this data. You can add the archive location to the device JUNOS configuration for both AI-Scripts and AIM after the initial installation, but the components are not usable until the archive location is configured. |
This chapter includes the following sections:
