The Devices table displays the devices in the AIM
application that are contained in a particular device group.
Devices can be associated to a device group in two ways:
When a JMB file is detected in any of the archive locations
of this device group, the device that generated the JMB file is automatically
added to the device group.
Devices that have been imported from JUNOScope can be
associated to the device group manually by the user.
To associate devices, follow these steps:
In the Devices table, click Associate Devices.
The Devices table is empty until you associate devices to the device
group.
The Associate
Devices page appears with the available devices.
Click Save Changes. The newly associated devices
now appear in the Device table by device name, routing platform type,
serial number, software version, and whether they are managed by the
JUNOScope software.
Displays the Associate Devices page where you can select device
groups to associate with an organization.
AIM Admin Settings
Always is enabled
Table 40 defines the Devices
table column descriptions.
Table 40: Devices Table
Column Descriptions
Name
Description
Privileges
Name
Name of the device
Not allowed to modify
Platform
Type of device (routing platform)
Not allowed to modify
Serial Number
Serial number of device
Not allowed to modify
Software Version
Operating software release and version running on the device
Not allowed to modify
Managed by JUNOScope
Whether device was imported from the JUNOScope software. Yes
appears if the device is managed by JUNOScope. The column is blank
if the device is not managed by JUNOScope. If the device is managed
by JUNOScope, an AI-Script bundle will be automatically installed
on that device.
Not allowed to modify
Associate Devices Table Description
Table 41 describes the command
button in the Associate Devices table.
