[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
Configuring Archive Locations
You can create up to five archive locations for
a device group.
To configure a new archive location, follow these steps:
- Click Settings > Organizations. The Organizations
table appears.
- Create
an organization or view the details of an existing one. Either click
Add New or click the organization name linkĖ. Either the Organization
Credentials page appears for you to create a new organization. Click
Save Changes. The Device Groups and Alert Registration tables appear.
Or, click the organization name link. The Organization Details page,
the Device Groups, and the Alert Registration tables appear.
- In the Organization Device Group table, click Add New. The Device
Group page appears with the Archive Locations table (for more information
about the Archive Locations, table, see Configuring Archive Locations.
- On the Device Group page, click Add New in the Archive Locations
table. A new row appears in the Archive Locations table. The Archive
Locations table is empty until you add archive locations.
- Type the required information in the Archive Locations table
column fields. See Archive Locations Table Description.
- Click Test Access. The test results appear in the
Test Results field. The test results are either Success or Failure.
- Click Save Changes at the top of the Device Groups
page. This command saves the device group parameters and the archive
locations.
If you specify an AI-Script install package, that
package is automatically installed on all the device in the group
that were imported from JUNOScope,
Archive Locations Table Description
Table 32 defines the Archive
Locations table command columns.
Table 32: Archive Locations
Table Command Button Descriptions
|
Button Name
|
Description
|
Privileges
|
Enabled/Disabled
|
Results
|
|
Test Access
|
Tests access to the selected device archive local location pathname
specified in the Local Location field.
|
AIM Admin
|
Enabled when you select an archive location in the Archive Location
table.
|
The Test Access results are either:
- Successfully accessed location.
- Failure to access location.
|
|
Add New
|
Adds a new row in the Archive Location table
|
AIM Admin
|
Always enabled
|
Adds new row for a new archive location in the table.
|
|
Delete
|
Removes the selected archive location
|
AIM Admin
|
Enabled when you select an archive location row in the Archive
Location table.
|
Removes an archive location row in the table.
|
Table 33 defines the Archive
Locations table fields.
Table 33: Archive Location
Table Field Descriptions
|
Name
|
Description
|
Privileges
|
Range/Length
|
Default
|
|
Local Location
|
The name of the local path where the device sends incident and
intelligence JMBs. This path is relative to the installation machine.
|
AIM Admin
|
128 characters
|
Blank filed
|
|
Test Results
|
Displays results from the Test Access command for this row.
The test results are either:
- Successfully accessed location.
- Failure to access location.
|
Not allowed to modify
|
N/A
|
Blank display field
|
|
Upload Command
|
Command that will be specified to set the archive location on
the JUNOS devices. This command will be used to transfer the JMB files
to the archive location.
|
AIM Admin
|
128 characters
|
Blank field
|
|
Password
|
Password that will be used by the JUNOS devices when they run
the upload command to transfer the JMB files to the archive location.
|
AIM admin
|
64 characters
|
Blank field
|
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]