[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
Associating Devices to a Device Group
The Devices table displays the devices in the AIM
application that are contained in a particular device group.
Devices can be associated to a device group in two ways:
- When a JMB file is detected in any of the archive location
of this device group, then the device that generated the JMB file
is automatically added to the device group.
- Devices that have been imported from JUNOScope can be
associated to the device group manually by the user.
To associate devices, follow these steps:
- In the Devices table, click Associate Devices.
The Devices table is empty until you associate devices to the device
group.
The Associate
Devices page appears with the available devices.
- In the Associate Devices table, select the devices you want
to associate with the device group. The devices that appear in the
table are those that were imported from JUNOScope. See Configuring JUNOScope Settings. See Associate Devices Table Description.
- Click Save Changes. The newly associated devices
now appear in the Device table by device name, routing platform type,
serial number, software version, and whether they are managed by the
JUNOScope software.
See Devices Table Description.
Devices Table Description
Table 34 defines the Device
table command buttons.
Table 34: Devices Table
Command Button Descriptions
| Button Name | Description | Privileges | Enabled/Disabled |
|
Associate Devices
|
Displays the Associate Devices page where you can select device
groups to associate with an organization.
|
AIM Admin
|
Always is enabled
|
Table 35 defines the Devices
table column descriptions.
Table 35: Devices Table
Column Descriptions
| Name | Description | Privileges |
|
Name
|
Name of the device
|
Not allowed to modify
|
|
Platform
|
Type of device (routing platform)
|
Not allowed to modify
|
|
Serial Number
|
Serial number of device
|
Not allowed to modify
|
|
Software Version
|
Operating software release and version running on the device
|
Not allowed to modify
|
|
Managed by JUNOScope
|
Whether device was imported from the JUNOScope software. Yes
appears if the devices is managed by JUNOScope. The column is blank
if the devices is not managed by JUNOScope. Devices managed by JUNOScope
indicates that an AI-Script bundle will be automatically installed
on that device.
|
Not allowed to modify
|
Associate Devices Table Description
Table 36 describes the command
button in the Associate Devices table.
Table 36: Associate
Devices Table Command Button Descriptions
| Button Name | Description | Privileges | Enabled/Disabled |
|
Save Changes
|
Saves the selected devices to associate with an AIM Device Group
as part of AIM Organization creation.
|
AIM Admin
|
Always is enabled
|
Table 37 describes the columns
in the Associate Devices table.
Table 37: Associate
Devices Table Descriptions
| Name | Description | Privileges |
|
Device Name
|
Name of the device to associate with an existing device group
|
AIM Admin
|
|
Host Name
|
The unique name by which a device is known on a network
|
AIM Admin
|
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]