Configuring the Services PIC or DPC for the BSG

You need to configure an AS or MultiServices PIC or MS-DPC for the BSG.

Step-by-Step Procedure

To configure the PIC or MS-DPC:

1. Enter edit mode for the PIC or DPC.

   [edit]

   user@host#edit interfaces ms-0/3/0

2. Configure a logical unit and enter edit mode for the logical unit.

   [edit interfaces ms-0/3/0]

   user@host#edit unit 0

3. Specify the protocol family and configure an address for the BSG.

   [edit interfaces ms-0/3/0 unit 0]

   user@host#set family inet address 10.10.200.20/32

4. Configure a description.

   [edit interfaces ms-0/3/0 unit 0]

   user@host#set description BSG-Service-PIC