[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Configuring a Gateway Controller

Step-by-Step Procedure

To configure a gateway controller:

  1. Create a gateway controller configuration, and assign a name to the gateway controller.
    [edit services pgcp gateway bgf-1]
    user@host#edit gateway-controller bsg-1
  2. Specify the BSG to control the virtual BGF.
    [edit services pgcp gateway bgf-1 gateway-controller bsg-1]
    user@host#set local-controller bsg-1
  3. Specify the IP address of the gateway controller. This is the address of the services PIC or DPC that you configured for the BSG.
    [edit services pgcp gateway bgf-1 gateway-controller bsg-1]
    user@host#set controller-address 10.10.200.20
  4. Configure the number of the gateway controller listening port.
    [edit services pgcp gateway bgf-1 gateway-controller bsg-1]
    user@host#set controller-port 2944

Related Topics

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]