[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Configuring the Trace Operations

By default, only important events are logged. You can configure the trace operations to be logged by including the following options at the [edit system services dhcp traceoptions] hierarchy level:



[edit dhcp system services dhcp traceoptions]
flag {
all;
binding;
config;
conflict;
event;
ifdb;
io;
lease;
main;
misc;
packet;
options;
pool;
protocol;
rtsock;
scope;
signal;
trace;
ui;
}

Table 31 describes which operation or event is recorded by each DHCP tracing flag. By default, all flags are disabled.

Table 31: DHCP Processes Tracing Flags

Flag	Operation or Event
all	All operations.
binding	Binding operations.
config	Logins to the configuration database.
conflict	Client-detected conflicts for IP addresses.
event	Important events.
ifdb	Interface database operations.
io	I/O operations.
lease	Lease operations.
main	Main loop operations.
misc	Miscellaneous operations.
packet	DHCP packets.
options	DHCP options.
pool	Address pool operations.
protocol	Protocol operations.
rtsock	Routing socket operations.
scope	Scope operations.
signal	DHCP signal operations.
trace	Tracing operations.
ui	User interface operations.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]