The jnxStormCtlTable, whose object identifier
is {jnxSecAccessPortMIBObjects 3} contains information about
different traffic types, the storm control parameters such as rising
threshold and falling threshold associated with each type, and the
action to be taken when the traffic exceeds the rising threshold level.
EachjnxStormCtlEntry, indexed with ifIndex and jnxStormCtlIfTrafficType, contains the objects listed
in Table 224.
Table 224: jnxStormCtlTable
Object
Object ID
Description
jnxStormCtlIfTrafficType
jnxStormCtlEntry 1
Indicates the type of traffic. This object uses the following
integer values:
1–Broadcast
2–Multicast
3–Unicast
jnxStormCtlRisingThreshold
jnxStormCtlEntry 2
Specifies the rising threshold value in packets per second
unit. Storm control action begins when the traffic exceeds this value.
jnxStormCtlFallingThreshold
jnxStormCtlEntry 3
Specifies the falling threshold value in packets per
second unit. Storm control action stops when the traffic drops to
this value.
jnxStormCtlAction
jnxStormCtlEntry 4
Specifies the action to be taken when the traffic exceeds
the rising threshold. This object returns one of the following integer
values:
1–shutdown: shuts down the port.
2–filter: applies a policy filter for the
corresponding traffic type on the interface.
