- server-identifier address;
- [edit system services dhcp],
- [edit system services dhcp pool],
- [edit system services dhcp static-binding]
Statement introduced before JUNOS Release 7.4.
For J-series Services Routers only. Configure a server identifier. This is an optional setting that can be used to identify a DHCP server in a DHCP message. It can also be used as a destination address from clients to servers (for example, when the boot file is set, but not the boot server).
Servers include the server identifier in DHCPOFFER messages so that clients can distinguish between multiple lease offers. Clients include the server identifier in DHCPREQUEST messages to select a lease and indicate which offer is accepted from multiple lease offers. Also, clients can use the server identifier to send unicast request messages to specific DHCP servers to renew a current lease.
This address must be a manually assigned, static IP address. The server cannot send a request and receive an IP address from itself or another DHCP server.
If no server identifier is set, the DHCP server sets the server identifier based on the primary interface address used by the server to receive a client request. For example, if the client sends a DHCP request and the server receives it on fe-0/0/0 and the primary interface address is 18.104.22.168, then the server identifier is set to 22.214.171.124.
address—The IPv4 address of the server. This address must be accessible by all clients served within a specified range of addresses (based on an address pool or static binding).
See Configuring a DHCP Server.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.