Configuring Miscellaneous System Management Features

This chapter discusses the following topics:

• Configuring Console and Auxiliary Port Properties
• Disabling the Sending of Redirect Messages on the Router
• Configuring the Source Address for Locally Generated TCP/IP Packets
• Configuring the Router or Interface to Act as a DHCP/BOOTP Relay Agent
• Disabling the Response to Multicast Ping Packets
• Configuring System Services
• Configuring Console Access to PICs
• Configuring a System Login Message
• Configuring a System Login Announcement
• Configuring JUNOS Software Processes
• Configuring the Password on the Diagnostics Port
• Viewing Core Files from JUNOS Processes
• Saving Core Files from JUNOS Processes
• Configuring Logical System Administrators
• Configuring a Router to Transfer Its Configuration to an Archive Site
• Specifying the Number of Configurations Stored on the Flash
• Configuring RADIUS System Accounting
• Configuring TACACS+ System Accounting
• Enabling the SRC Software
• Configuring the ICMP4 Rate Limit
• Configuring the ICMPv6 Rate Limit
• Configuring IP-IP Path MTU Discovery
• Configuring TCP MSS for Session Negotiation
• Configuring IPv6 Path MTU Discovery
• Configuring IPv6 Duplicate Address Detection Transmits
• Configuring Acceptance of IPv6 Packets with Zero Hop-Limit
• Configuring GRE Path MTU Discovery
• Configuring Path MTU Discovery
• Configuring Source Quench
• Configuring the Router to Drop Packets with the SYN and FIN Bits Set
• Configuring No TCP RFC 1323 Extensions
• Configuring No TCP RFC 1323 PAWS Extension
• Configuring the Range of Port Addresses
• Configuring ARP Learning and Aging
• Configuring System Alarms to Appear Automatically