List of Tables

Table 1: Notice Icons

Table 2: Text and Syntax Conventions

Table 3: Technical Documentation for Supported Routing Platforms

Table 4: JUNOS Software Network Operations Guides

Table 5: Additional Books Available Through http://www.juniper.net/books

Table 6: CoS Mappings—Inputs and Outputs

Table 7: Default VPLS Classifiers

Table 8: CoS Hardware Capabilities and Limitations

Table 9: Drop Priority Classification for Packet Sent from Enhanced III to Enhanced II FPC on M320

Table 10: Drop Priority Classification for Packet Sent from Enhanced II FPC Without Tricolor Marking to Enhanced III FPC on M320

Table 11: Drop Priority Classification for Packet Sent from Enhanced II FPC With Tricolor Marking to Enhanced III FPC on M320

Table 12: Routing Engine Protocol Queue Assignments

Table 13: Default CoS Values

Table 14: Default IP Precedence Classifier

Table 15: Default MPLS Classifier

Table 16: Default DSCP Classifier

Table 17: Default IEEE 802.1p Classifier

Table 18: Default IP Precedence (ipprec-default) Classifier

Table 19: Logical Interface Classifier Combinations by Platform

Table 20: Default MPLS EXP Classification Table

Table 21: Default Forwarding Classes

Table 22: Sample Forwarding Class-to-Queue Mapping

Table 23: Buffer Size Temporal Value Ranges by Platform Type

Table 24: Recommended Delay Buffer Sizes

Table 25: Maximum Delay Buffer with q-pic-large-buffer Enabled by Interface

Table 26: Delay-Buffer Calculations

Table 27: NxDSO Transmission Rates and Delay Buffers

Table 28: Scheduling Priority Mappings by FPC Type

Table 29: Shaping Rate and WRR Calculations by PIC Type

Table 30: Transmission Scheduling Support by Interfaces Type

Table 31: Bandwidth and Delay Buffer Allocations by Configuration Scenario

Table 32: Bandwidth and Delay Buffer Allocations by Configuration Scenario

Table 33: Scheduler Allocation for an Ethernet IQ2 PIC

Table 34: TCM Platform Interoperation

Table 35: Color-Blind Mode TCM Color-to-PLP Mapping

Table 36: Color-Aware Mode TCM PLP Mapping

Table 37: Color-Blind Mode TCM Color-to-PLP Mapping

Table 38: Color-Aware Mode TCM Mapping

Table 39: Tricolor Marking Policer Statements

Table 40: Default Packet Header Rewrite Mappings

Table 41: Default MPLS EXP Rewrite Table

Table 42: Hierarchical Scheduler Nodes

Table 43: Queue Priority

Table 44: Internal Node Queue Priority for CIR Mode

Table 45: Internal Node Queue Priority for PIR-only Mode

Table 46: IQ2 PIC and EQ DPC Compared

Table 47: Shaper Accuracy of 40-port Gigabit Ethernet EQ DPC at the Logical Interface Level

Table 48: Shaper Accuracy of 40-port Gigabit Ethernet EQ DPC at the Interface Set Level

Table 49: Shaper Accuracy of 40–port Gigabit Ethernet EQ DPC at the Port Level.

Table 50: JUNOS Priorities Mapped to EQ DPC Hardware Priorities

Table 51: LSR Default Classification