See the following sections:
- loss-priority level;
- [edit class-of-service classifiers type classifier-name forwarding-class class-name]
Specify packet loss priority value for a specific set of code-point aliases and bit patterns.
level can be one of the following:
See Classifying Packets by Behavior Aggregate and Configuring Tricolor Marking.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
- loss-priority level code-points [ values ];
- [edit class-of-service loss-priority-maps frame-relay-de map-name]
For J-series Services Routers only, map CoS values to a loss priority.
level can be one of the following:
The remaining statement is explained separately.
See Classifying Frame Relay Traffic.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
- loss-priority (high | low);
- [edit firewall family family-name filter filter-name term term-name then]
Set the loss priority of incoming packets.
See Classifying Packets Based on Various Packet Header Fields; for a general discussion of this statement, see the JUNOS Policy Framework Configuration Guide.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
- loss-priority level;
- [edit class-of-service rewrite-rules type rewrite-name forwarding-class class-name]
Specify a loss priority to which to apply a rewrite rule. The rewrite rule sets the code-point aliases and bit patterns for a specific forwarding class and packet loss priority (PLP). The inputs for the map are the forwarding class and the PLP. The output of the map is the code-point alias or bit pattern.
level can be one of the following:
See Rewriting Packet Header Information, Classifying Packets by Behavior Aggregate, and Configuring Tricolor Marking.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
- loss-priority (any | low | medium-low | medium-high | high);
- [edit class-of-service schedulers scheduler-name drop-profile-map]
Specify a loss priority to which to apply a drop profile. The drop profile map sets the drop profile for a specific PLP and protocol type. The inputs for the map are the PLP designation and the protocol type. The output is the drop profile.
any—The drop profile applies to packets with any PLP.
high—The drop profile applies to packets with high PLP.
medium—The drop profile applies to packets with medium PLP.
low—The drop profile applies to packets with low PLP.
See Configuring Schedulers and Configuring Tricolor Marking.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
- loss-priority (high | low | medium);
- [edit firewall family family-name simple-filter filter-name term term-name then]
Set the loss priority of incoming packets.
See Classifying Packets Based on Various Packet Header Fields; for a general discussion of this statement, see the JUNOS Policy Framework Configuration Guide.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.