- show (accounting | aps | arp | as-path | bfd | bgp | chassis
| class-of-service | cli | configuration | connections | dvmrp | dynamic-tunnels
| firewall | helper | host | igmp | ike | ilmi | interfaces | ipsec
| ipv6 | isis | l2circuit | l2vpn | ldp | link-management | log |
mld | mpls | msdp | multicast | ntp | ospf | ospf3 | passive-monitoring
| pfe | pgm | pim | policer | policy | pppoe | rip | ripng | route
| rsvp | sap | services | snmp | ssh-known-hosts | system | task |
ted | version | vpls | vrrp)
Show information about all aspects of the software, including interfaces and routing protocols.
Most show commands are discussed in the JUNOS System Basics and Services Command Reference. The following show commands are discussed in the JUNOS Interfaces Command Reference: show aps, show ike, show ilmi, show interfaces, show ipsec, show passive-monitoring, show pppoe, show services, and show vrrp.
Depends on the specific command.