[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
show interfaces redundancy
Syntax
- show interfaces redundancy
Release Information
Command introduced before JUNOS Release
7.4.
Description
(M-series and T-series routing platforms only)
Display general information about adaptive services and link services
intelligent queuing (IQ) interfaces redundancy.
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show interfaces redundancy
Output Fields
Table 102 lists the output
fields for the show interfaces redundancy command. Output
fields are listed in the approximate order in which they appear.
Table 102: show interfaces redundancy Output Fields
|
Field Name
|
Field Description
|
|
Interface
|
Name of the redundant adaptive
services or link services IQ interface.
|
|
State
|
State of the redundant interface: Not present, On primary, or On secondary.
|
|
Last Change
|
Timestamp for the last change in
status.
|
|
Primary
|
Name of the interface configured
to be the primary interface.
|
|
Secondary
|
Name of the interface configured
to be the backup interface.
|
|
Current Status
|
Physical status of the primary
and secondary interfaces.
|
show interfaces redundancy
user@host> show interfaces redundancy
Interface State Last change Primary Secondary Current status
rsp0 Not present sp-1/0/0 sp-0/2/0 both down
rsp1 On secondary 1d 23:56 sp-1/2/0 sp-0/3/0 primary down
rsp2 On primary 10:10:27 sp-1/3/0 sp-0/2/0 secondary down
rlsq0 On primary 00:06:24 lsq-0/3/0 lsq-1/0/0 both up
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
