[
Contents
] [
Prev
] [
Next
] [
Index
] [
Report an Error
]
Configuring VPLS
To implement VPLS, you must configure the following:
Configuring Routing Protocols on the PE and Core Routers
Configuring VPLS Encapsulation on CE-Facing Interfaces
Configuring a VPLS Routing Instance
Option: Configuring VPLS to Use LSI Interfaces
Option: Configuring Tunnel Services on MX-series Routers
Option: Selecting an LSP for the VPLS Routing Instance to Traverse
Optional: Configuring Integrated Routing and Bridging and VLAN IDs in a VPLS Routing Instance (MX-Series Routers Only)
Option: Applying VPLS Policers and Filters
Option: Enabling VPLS Class of Service
Option: Enabling VPLS Graceful Restart
Option: Clearing MAC Addresses and Modifying the VPLS Table Timeout Interval
Option: Configuring VPLS Interinstance Bridging and Routing
Option: Selecting Interfaces to Process VPLS Traffic
Option: Limiting the Number of MAC Addresses Learned on an Interface
Option: Optimizing VPLS Traffic Flows
Option: Aggregated Interfaces for VPLS
Option: VPLS Multihoming (BGP Signaling Only)
Option: Configuring VPLS Graceful RE Switchover
Option: Configuring VPLS Traffic Flooding over a Point-to-Multipoint LSP
Option: Configuring VPLS with LDP Signaling
Option: Configuring the Spanning Tree Protocol and VPLS on MX-Series Routers
[
Contents
] [
Prev
] [
Next
] [
Index
] [
Report an Error
]
