[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

unit





unit logical-unit-number {





accept-source-mac {





mac-address mac-address {





policer {

input cos-policer-name;

output cos-policer-name;

}




}




}





accounting-profile name;


allow-any-vci;


atm-scheduler-map (map-name | default);


bandwidth rate;


cell-bundle-size cells;


clear-dont-fragment-bit;





compression {





rtp {


f-max-period number;


queues [ queue-numbers ];





port (Voice Services) {

minimum port-number;

maximum port-number;

}




}




}





compression-device interface-name;


description text;





dialer-options {

l2tp-interface-id name;

(shared | dedicated);

}





disable;


dlci dlci-identifier; 


drop-timeout milliseconds;


encapsulation type;


epd-threshold cells plp1 cells;


fragment-threshold bytes;





input-vlan-map {

(pop | pop-pop | pop-swap | push | push-push | swap |


swap-push | swap-swap);


inner-tag-protocol-id tpid;


inner-vlan-id number;


vlan-id number;


tag-protocol-id tpid;

}





interleave-fragments;


inverse-arp; 





layer2-policer {

input-policer policer-name;

input-three-color policer-name;

output-policer policer-name;

output-three-color policer-name;

}





link-layer-overhead percent;


minimum-links number;


mrru bytes;


multicast-dlci dlci-identifier; 


multicast-vci vpi-identifier.vci-identifier; 


multilink-max-classes number;


multipoint number;


multipoint;





oam-liveness {

up-count cells;

down-count cells;

}





oam-period (disable | seconds); 





output-vlan-map {

(pop | pop-pop | pop-swap | push | push-push | swap |


swap-push | swap-swap);


inner-tag-protocol-id tpid;


inner-vlan-id number;


vlan-id number;


tag-protocol-id tpid;

}





passive-monitor-mode;


peer-unit unit-number;


plp-to-clp;


point-to-point;


service-domain (inside | outside);





shaping {

(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length); 


queue-length number;

}





short-sequence;


transmit-weight number;

(traps | no-traps);


trunk-bandwidth rate;


trunk-id number;





tunnel {


backup-destination address;


destination address; 


key number;





routing-instance {


destination routing-instance-name;

}





source source-address;


ttl number;

}





vci vpi-identifier.vci-identifier; 


vpi vpi-identifier;


vlan-id number;


vlan-tags inner tpid.vlan-id outer tpid.vlan-id;





family family {





accounting {


destination-class-usage;





source-class-usage {


direction;

}




}





bundle interface-name;





filter {

input filter-name;

output filter-name;

group filter-group-number;

}





ipsec-sa sa-name;


keep-address-and-control;


mtu bytes;


multicast-only;


no-redirects;





policer {

arp policer-template-name;

input policer-template-name;

output policer-template-name;

}





primary;


proxy inet-address address;


proxy-arp;


receive-options-packets;


receive-ttl-exceeded;


remote (inet-address address | mac-address address);





rpf-check <fail-filter filter-name> {

<mode loose>;

}








sampling {


direction;

}








service {





input {

service-set service-set-name <service-filter filter-name>;

post-service-filter filter-name;

}








output {

service-set service-set-name <service-filter filter-name>;

}




}




(translate-discard-eligible | no-translate-discard-eligible);

(translate-fecn-and-becn | no-translate-fecn-and-becn);





address address {


arp ip-address (mac | multicast-mac) mac-address <publish>;


destination address;


eui-64;


broadcast address;


multipoint-destination address (dlci dlci-identifier | vci vci-identifier);





multipoint-destination address {


epd-threshold cells plp1 cells;


inverse-arp; 





oam-liveness {

up-count cells;

down-count cells;

}





oam-period (disable | seconds); 





shaping {

(cbr rate | rtvbr peak rate
sustained rate burst length | vbr peak rate sustained rate burst length); 


queue-length number;

}





vci vpi-identifier.vci-identifier; 

}





preferred;


primary;





vrrp-group group-number {

(accept-data | no-accept-data);


advertise-interval seconds;


authentication-type authentication;


authentication-key key;


fast-interval milliseconds;




(preempt | no-preempt) {


hold-time seconds;

}





priority number;





track {


priority-hold-time seconds;

interface interface-name priority-cost priority;


priority-cost priority;





bandwidth-threshold bits-per-second {


priority-cost priority;

}




}





virtual-address [ addresses ];

}




}




}




}

Hierarchy Level




[edit interfaces interface-name],

[edit logical-routers logical-router-name interfaces interface-name]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure a logical interface on the physical device. You must configure a logical interface to be able to use the physical device.

Options

logical-unit-number—Number of the logical unit.
The remaining statements are explained separately.

Usage Guidelines

See Configuring Logical Interface Properties.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.