- family family {
-
-
accounting {
-
destination-class-usage;
-
-
source-class-usage {
-
direction;
- }
- }
-
bundle interface-name;
-
-
filter {
- dialer filter-name;
- input filter-name;
- output filter-name;
- group filter-group-number;
- }
-
ipsec-sa sa-name;
-
keep-address-and-control;
-
mtu bytes;
-
multicast-only;
-
negotiate-address;
-
no-redirects:
-
-
policer {
- arp policer-template-name;
- input policer-template-name;
- output policer-template-name;
- }
-
primary;
-
proxy inet-address address;
-
receive-options-packets;
-
receive-ttl-exceeded;
-
remote (inet-address address | mac-address address);
-
rpf-check <fail-filter filter-name>;
-
-
sampling {
-
direction;
- }
-
-
service {
-
-
input {
-
service-set service-set-name <service-filter filter-name>;
-
post-service-filter filter-name;
- }
-
-
output {
-
service-set service-set-name <service-filter filter-name>;
- }
- }
- (translate-discard-eligible | no-translate-discard-eligible);
- (translate-fecn-and-becn | no-translate-fecn-and-becn);
-
unnumbered-address interface-name destination address destination-profile profile-name;
-
-
address address {
-
arp ip-address (mac | multicast-mac) mac-address <publish>;
-
broadcast address;
-
destination address;
-
destination-profile name;
-
eui-64;
-
multipoint-destination address dlci dlci-identifier;
-
-
multipoint-destination address {
-
epd-threshold cells;
-
inverse-arp;
-
-
oam-liveness {
- up-count cells;
- down-count cells;
- }
-
oam-period (disable | seconds);
-
-
shaping {
- (cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
-
queue-length number;
- }
-
vci vpi-identifier.vci-identifier;
- }
-
primary;
-
preferred;
-
- vrrp-group group-number {
- (accept-data | no-accept-data);
-
advertise-interval seconds;
-
authentication-type authentication;
-
authentication-key key;
-
fast-interval milliseconds;
-
- (preempt | no-preempt) {
-
hold-time seconds;
- }
-
priority number;
-
-
track {
-
priority-hold-time seconds;
-
-
interface interface-name {
-
priority-cost priority;
-
-
bandwidth-threshold bits-per-second {
-
priority-cost priority;
- }
- }
- }
-
virtual-address [ addresses ];
- }
- }
- }
- [edit interfaces interface-name unit logical-unit-number],
- [edit logical-routers logical-router-name interfaces interface-name unit logical-unit-number]
Configure protocol family information for the logical interface.
The remaining statements are explained separately.
See Configuring the Protocol Family and the JUNOS Services Interfaces Configuration Guide.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.