A
- across-the-network applications 1
- action statement 1
- adaptive-shapers statement 1
- adaptive-shaper statement 1
- adaptive shaping
- for Frame Relay 1
- address statement 1
- aggregated Ethernet interfaces
- CoS and 1
- aggregated SONET/SDH interfaces
- aliases, forwarding-class 1
- application-profile statement 1
- application-sets statement
- CoS 1
- applications statement
- AS PIC
- ATM2 IQ interfaces
- CoS and 1
- eight forwarding classes 1
- atm-options statement 1
- atm-scheduler-map statement 1
B
- bandwidth
- and delay buffer allocation 1
- guaranteed 1, 2, 3
- oversubscribing 1
- sharing excess 1
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
- buffer size 1
- buffer-size statement 1
C
- cbr statement 1
- channelized IQ interfaces
- CoS 1
- CIR 1
- classification
- AS PIC 1
- behavior aggregate 1
- fixed 1
- for Frame Relay traffic 1, 2
- multifield
- destination address 1
- classification-override statement 1,
- usage guidelines 1
- 1
- classifiers
- default for VPLS 1
- classifiers statement 1
- class-of-service statement 1
- class statement 1
- code-point aliases 1
- code-point-aliases statement 1
- code-points statement 1
- code-point statement 1
- color-aware
- single-rate 1
- two-rate 1
- color-blind
- single-rate 1
- two-rate 1
- comments, in configuration statements 1
- configuration statements
- CoS 1
- conventions
- text and syntax 1
- copy-tos-to-outer-ip-header statement 1
- CoS
- action statements 1
- additional examples 1
- aggregated Ethernet interfaces 1
- aggregated SONET/SDH interfaces 1
- applications 1
- applications of 1
- AS PIC 1
- ATM2 IQ interfaces 1
- buffer size 1
- channelized IQ interfaces 1
- default scheduler 1
- drop profile 1, 2, 3
- eight forwarding classes 1
- example configuration 1
- for aggregated interfaces 1
- for Frame Relay 1
- for MPLS 1
- for tunnels 1
- for virtual channels 1
- forwarding, next-hop selection 1
- forwarding-class aliases 1
- Gigabit Ethernet IQ interfaces 1
- interfaces
- sample configuration 1
- match conditions 1
- output shaping
- for DLCI or VLAN interface 1
- overriding input classification 1
- protocol queue assignments
- changing 1
- RED 1
- rewrite rules 1
- rules 1
- scheduler priority 1
- scheduling 1
- transmission rate 1
- CoS-based forwarding 1
- CoS queues
- packet forwarding component 1
- CoS values 1
- curly braces, in configuration statements 1
- customer support 1,
- contacting JTAC 1
- 1
D
- default statement 1
- delay buffer 1
- delay-buffer-rate statement 1
- destination address classification 1, 2
- destination-address statement
- CoS 1
- destination statement 1
- DiffServ 1, 2, 3
- documentation set
- comments on 1
- drop-probability statement 1, 2
- drop-profile-map statement 1
- drop-profiles statement 1
- drop-profile statement 1
- drop-timeout statement 1
- DSCP 1
- dscp-code-point statement 1
- dscp-ipv6 statement 1
- dscp statement 1
E
- egress-shaping-overhead statement 1
- eight forwarding classes 1, 2
- epd-threshold statement 1
- Ethernet IQ2 PIC
- schedulers 1
- example
- interface
- schedulers 1
- logical bandwidth policer 1
- EXP bits 1, 2
- explicit-null statement
- with MPLS EXP classifiers 1
- exp-push-push-push statement 1
- exp statement 1
- exp-swap-push-push statement 1
F
- fabric priority queuing 1, 2
- fabric statement 1
- family statement
- ATM interfaces 1
- MF classifiers 1
- fill-level statement 1
- filter statement 1
- firewall statement 1
- fixed classification 1
- font conventions 1
- forwarding, next-hop selection 1
- forwarding-class aliases 1
- forwarding classes 1
- forwarding-classes statement 1
- forwarding-class statement 1
- forwarding policy options 1
- forwarding-policy statement 1
- four loss priorities 1
- fragmentation
- example configuration 1
- forwarding classes 1
- fragmentation-maps statement 1
- fragmentation-map statement 1
- fragment-threshold statement 1
- Frame Relay
- CoS adaptive shaping 1
- CoS classification of traffic 1, 2
- frame-relay-de statement 1
- from statement
- CoS 1
- stateful firewall
G
- Gigabit Ethernet IQ interfaces
- CoS 1
- guaranteed rate 1
- guaranteed-rate statement 1
H
- high-plp-max-threshold statement 1
- high-plp-threshold statement 1
- host-outbound traffic statement 1
I
- icons defined, notice 1
- ieee-802.1 statement 1
- if-exceeding statement 1
- import statement 1
- inet-precedence statement 1
- ingress-shaping-overhead statement 1,
- 1
- input-policer statement 1
- input-scheduler-map statement 1
- input-shaping-rate statement 1
- input-three-color statement 1
- input-traffic-control-profile statement 1
- interfaces
- aggregated Ethernet and SONET/SDH 1
- ATM, VC tunnel CoS 1
- CoS classifiers on 1
- link services 1
- interfaces statement
- CoS 1
- interpolate statement 1
- in-the-box applications 1
- IPv4 or IPv6 packets
- overriding input classification 1
- irb statement
- CoS 1
- IRB statement
- usage guidelines 1
L
- Layer 2 policer
- applying to interface 1
- example configurations 1
- layer2-policer statement 1
- Layer 3 VPN
- multifield classification 1
- linear-red-profiles statement 1
- linear-red-profile statement 1
- link services interfaces 1
- logical bandwidth policer
- example 1
- logical-bandwidth-policer statement 1,
- usage guidelines 1
- 1
- logical-interface-policer statement 1
- loss-priority-maps statement 1
- loss-priority statement 1
- low-plp-max-threshold statement 1
- low-plp-threshold statement 1
- lsp-next-hop statement 1
- LSPs
- CoS values 1
M
- manuals
- comments on 1
- match-direction statement
- CoS 1
- maximum delay per queue 1
- max-queues-per-interface statement 1
- mode statement 1
- MPLS
- CoS values 1
- EXP bits 1
- with CoS 1
- MPLS EXP classifiers
- for explicit-null labels 1
- routing instances 1
- multilink-class statement 1
- MX-Series routers
- capabilities and limits 1
- IRB statement 1
N
- NAT
- CoS configuration 1
- next-hop-map statement 1
- next-hop selection
- example configuration 1
- next-hop statement 1
- no-fragmentation statement 1
- notice icons defined 1
O
- one-rate four-color marking 1
- output-policer statement 1
- output-three-color statement 1
- output-traffic-control-profile statement 1,
- usage guidelines 1, 2
- 1
- oversubscription 1, 2
P
- packet forwarding component
- CoS queues 1
- packet loss priority 1
- parentheses, in syntax descriptions 1
- per-session-scheduler statement 1
- per-unit-scheduler statement 1
- per-unit scheduling 1
- PIR 1
- PLP 1
- plp1 statement
- usage guidelines 1
- plp-to-clp statement 1
- policer
- Layer 2
- applying to interface 1
- policer statement
- firewall 1
- priority, CoS
- configuration example 1
- priority queuing, CoS 1
- priority statement 1
- protocols
- CoS queue assignments
- changing 1
- protocol statement 1
Q
- q-pic-large-buffer statement 1
- queue-depth statement 1
- queue-num statement
- queue statement 1
- queuing priority, CoS 1
R
- random early detection mechanism 1
- RED
- dropping packets 1, 2
- drop-probability statement
- usage guidelines 1, 2
- drop-profiles statement
- weighted
- configuring 1
- red-buffer-occupancy statement 1
- RED buffer occupancy weight
- configuring 1
- reflexive | reverse statement
- usage guidelines 1
- reflexive statement 1
- restricted-queues statement 1
- reverse statement 1
- rewrite rules 1
- rewrite-rules statement 1
- RFC 2698 1
- routing instances
- MPLS EXP classifier 1
- routing-instances statement 1
- routing-instance statement
- rtvbr statement 1
- rule-set statement
- CoS 1
- rule statement
S
- scheduler
- shared input 1
- scheduler-filter statement
- usage guidelines 1
- scheduler-map-chassis statement 1
- scheduler-maps statement
- for ATM2 IQ interfaces 1
- for most non-ATM2 IQ interfaces 1
- scheduler-map statement 1
- schedulers
- Ethernet IQ2 PIC 1
- interface
- configuration example 1
- schedulers statement 1
- scheduler statement 1
- scheduling 1
- services
- AS PIC
- CoS configuration 1
- services statement
- CoS 1
- shaping
- calculations 1
- Gigabit Ethernet IQ2 PICs and 1
- input and output 1
- output
- shared 1
- with a guaranteed rate 1
- shaping-rate statement 1
- shaping statement 1
- shared-instance statement 1
- shared-scheduler statement 1
- shared scheduling 1
- signaled LSPs
- CoS values 1
- simple-filter statement
- interfaces 1
- sip-text statement 1
- sip-video statement 1
- sip-voice statement 1
- source-address statement
- CoS 1
- stateful firewall
- CoS configuration 1
- strict-high priority, explained 1, 2
- support, technical 1
- syntax conventions 1
- syslog statement
- CoS 1
T
- technical support
- contacting JTAC 1
- term statement
- CoS 1
- firewall
- normal filter 1
- then statement
- CoS 1
- stateful firewall
- three-color-policer statement 1
- traffic-control-profiles statement 1,
- 1
- traffic-manager statement 1
- transmission rate, CoS 1
- transmit-rate statement 1
- transmit-weight statement 1
- tricolor marking
- filter, applying to 1
- single-rate
- color-aware mode 1
- two-rate
- color-aware mode 1
- tricolor marking policer 1
- tri-color statement 1
- trigger statement 1
- tunnels
- CoS and 1
- two-rate tricolor marking 1
U
- unit statement
- CoS 1
- usage guidelines 1
V
- vbr statement 1
- vc-cos-mode statement 1
- vci statement 1
- VC tunnel CoS
- ATM2 IQ interfaces 1
- virtual-channel-groups statement 1
- virtual-channel-group statement 1
- virtual channels 1
- virtual-channels statement 1
- virtual-channel statement 1
- VLAN tags
- application of rewrite rules to 1
- vlan-tag statement 1
- VoIP traffic classification 1
- VPLS
- default classifiers for 1
W
- weighted RED
- configuring 1
- examples 1