(T-series and M320 routers only) Clear or stop a text message on the craft interface.

clear chassis display message

(T-series, M120, M320, and MX-series routers only) Change Control Board (CB) status information.

request chassis cb

(M7i and M10i routers only) Control the operation of the Compact Forwarding Engine Board (CFEB).

request chassis cfeb

(M120 and MX-series routers only) Control the operation of the specified fabric plane.

request chassis fabric plane

(M120 router only) Control the operation of the specified Fowarding Engine Board (FEB).

request chassis feb

(M20, M40, M40e, M120 M160, M320, and MX-series routers, and T-series routing platforms only) Control the operation of the Flexible PIC Concentrator (FPC).

request chassis fpc

(M40e, M120, M160, M320, and MX-series routers, and T-series routing platforms only) Resynchronize the Front Panel Module (FPM) craft interface status

request chassis fpm resync

(Routing matrix only) Control the operation of a T640 routing node (or line-card chassis) that is connected to a TX matrix platform.

request chassis lcc

(M40e and M160 routers only) Control the operation of the Miscellaneous Control Subsystem (MCS).

request chassis mcs

(M40e and M160 routers only) Control the operation of the Packet Forwarding Engine (PFE) clock generator (PCG).

request chassis pcg

Control the operation of a Physical Interface Card (PIC).

request chassis pic

(M120 routers only) Control the operation of a Fowarding Engine Board (FEB) in a redundancy group .

request chassis redundancy feb slot

For routers with multiple Routing Engines, control which Routing Engine is the master.

request chassis routing-engine master

(T-series routing platforms only) Control the operation of the specified SONET Clock Generator (SCG).

request chassis scg

(M40e and M160 routers only) Control which Switching and Forwarding Module (SFM) is master.

request chassis sfm master switch

(M40e and M160 routers only) Control the operation of the specified SFM .

request chassis sfm

(M320 routers and T-series routing platforms only) Control the operation of the specified Switch Interface Board (SIB).

request chassis sib

(T-series routing platforms only) Restart the specified Switch Processor Mezzanine Board (SPMB) on the Control Board (CB).

request chassis spmb restart

(M320 routers only) Change the external clock source used for chassis synchronization.

request chassis synchronization switch

Send a message to the router's craft interface.

set chassis display message

Display chassis alarm status.

show chassis alarms

(M7i and M10i routers only) Change and display CFEB status information.

show chassis cfeb

View information that is currently displayed on the craft interface.

show chassis craft-interface

Display environmental information about the routing platform chassis, including the temperature and information about the fans, power supplies, and Routing Engine.

show chassis environment

(T-series, M120, M320, and MX-series routers only) Display CB environmental information.

show chassis environment cb

(M20, M40, M40e, M120, M160, M320, and MX-series routers, and T-series routing platforms only) Display FPC environmental status information.

show chassis environment fpc

(M20, M40, M40e, M120, M160, M320, and MX960 routers, and T-series routing platforms only) Change and display FPM status information.

show chassis environment fpm

(M40e and M160 routers only) Display MCS environmental status information.

show chassis environment mcs

Display generic environmental information.

show chassis environment

(M40e and M160 routers only) Display PCG environmental status information.

show chassis environment pcg

(M40e, M120, M160, M320, and MX-series routers, and T-series routing platforms only) Display Power Entry Module (PEM) environmental status information.

show chassis environment pem

Display Routing Engine environmental status information.

show chassis environment routing-engine

(T-series routing platforms only) Display SCG environmental information.

show chassis environment scg

(M40e and M160 routers only) Display SFM environmental information.

show chassis environment sfm

(M320 routers and T-series routing platform only) Display SIB environmental information.

show chassis environment sib

(M10i, M40e, M120, M160, M320, and MX960 routers, and T-series routing platforms only) Display information about the ports on the Control Board (CB) Ethernet switch.

show chassis ethernet-switch

(M120 router only) Display the state of the electrical and optical switching fabric link between the Forwarding Engine Boards (FEBs) and the fabric planes, as interpreted by the FEB.

show chassis fabric feb

(M320 and MX-series routers and T-series routing platform only) Display the state of the electrical and optical switch fabric links between the FPCs and the SIBs.

show chassis fabric fpcs

(M120 and MX960 routers only) Display the state of the switching fabric map for connections from the FEBs to the ports on the fabric planes, as interpreted by the fabric plane.

show chassis fabric map

(M120 and MX960 routers only) Display the state of all fabric plane connections to the FEBs.

show chassis fabric plane

(M120 and MX-series routers only) Display the CB location of each plane.

show chassis fabric plane-location

(T-series routing platforms only) Display the state of the electrical and optical switch fabric links:

• Between the SIBs in the TX Matrix platform and the SIBs in the T640 routing nodes.
• Between the T640 SIBs and the FPCs in a T640 routing node.

show chassis fabric sibs

(T-series routing platforms only) Display the state of the switching fabric topology for the SIB connection between the TX Matrix platform and the T640 routing nodes.

show chassis fabric topology

(M5, M10, and M120 routers only). Display FEB status information.

show chassis feb

Display the version levels of the firmware running on the SCB, SFM, SSB, FEB, and FPCs.

show chassis firmware

(J-series Services Routers only) Display status of the forwarding process (fwdd).

show chassis forwarding

(M20, M40, M40e, M160, and M320 routers, and T-series routing platforms only) Display FPC status information.

show chassis fpc

(M120 router only) Display the FPC and FEB mapping and their respective states.

show chassis fpc-feb-connectivity

Display hardware inventory.

show chassis hardware

(Routing matrix only) Display the status of all T640 routing nodes (or line-card chassis) connected to the TX Matrix platform.

show chassis lccs

Display chassis location information.

show chassis location

Display MAC address information.

show chassis mac-addresses

Display PIC status information.

show chassis pic

(J-series routers only) Display PIM power ratings.

show chassis power-ratings

(M120 routers only) Display status information about configured Fowarding Engine Board (FEB) redundancy groups.

show chassis redundancy feb

Display the information about one or more Routing Engines.

show chassis routing-engine

(M40 router only) Display System Control Board (SCB) status information.

show chassis scb

(M40e and M160 routers only) Change and display SFM status information.

show chassis sfm

(M320 routers and T-series routing platforms only) Display SIB status information.

show chassis sibs

(T-series routing platforms only) Display SPMB status information.

show chassis spmb

(T-series routing platforms only) Display SPMB Switch Interface Board (SIB) status information.

show chassis spmb sibs

(M320 routers only) Display information about the external clock source currently used for chassis synchronization.

show chassis synchronization

(M120 and MX-series routers only) Display chassis temperature threshold settings.

show chassis temperature-thresholds