To verify that your dynamic flow capture configuration is operating correctly, issue the following command:
- show services dynamic-flow-capture capture-group
group-name control-source
source-identifier source-id
(detail)
The following section shows the output of this command when used with the configuration example.
user@router1> show services
dynamic-flow-capture control-source capture-group g1 source-identifier
cs2 detail
Capture group: g1, Control source: cs2 Criteria added: 1, Criteria add failed: 0 Active criteria: 2 Static criteria: 0, Dynamic criteria: 2 Control protocol requests: 3 Add Delete List Refresh No-op Requests 1 0 1 0 1 Failed 0 0 0 0 0 Add request rate: 0 Add request peak rate: 1 Bandwidth across all criteria: 0 Total notifications: 0 Restart: 0, Rollover: 0, No-op: 0, Timeout: 0, Congestion: 0, Congestion delete: 0, Dups dropped: 0 Criteria deleted: 0 Timeout idle: 0, Timeout total: 0, Packets: 0, Bytes: 0 Sequence number: 242
To clear dynamic flow capture criteria belonging to a particular control source, issue the clear services dynamic-flow-capture command. For more information on other dynamic flow capture-related operational mode commands, see the JUNOS System Basics and Services Command Reference.