[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
Verifying Your Work
To verify the proper operation of logical routers,
use the following commands:
-
show bgp summary (logical-router logical-router-name)
-
show isis adjacency (logical-router logical-router-name)
-
show mpls lsp (logical-router logical-router-name)
-
show ospf neighbor (logical-router logical-router-name)
-
show route (logical-router logical-router-name)
-
show route protocol protocol (logical-router logical-router-name)
-
show rsvp session (logical-router logical-router-name )
-
logical-router (logical-router-name)
The following sections show the output of commands
used with the configuration example:
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]