To verify correct operation of a channelized OC3 IQ interface, use the following commands:
To view the interface names of the physical channelized OC3 IQ interface and the resulting interfaces configured on the channelized IQ interface, use the show interfaces controller command:
user@host> show interfaces controller
coc3-0/0/0
Controller Admin Link
coc3-0/0/0 up up
coc1-0/0/0:1 up up
t3-0/0/0:1 up up
coc1-0/0/0:2 up up
t1-0/0/0:2:1 up up
ct1-0/0/0:2:2 up up
ds-0/0/0:2:2:1 up up
ds-0/0/0:2:2:2 up up
coc1-0/0/0:3 up up
ct3-0/0/0:3 up up
ct1-0/0/0:3:1 up up
ds-0/0/0:3:1:1 up up
ds-0/0/0:3:1:2 up up
ds-0/0/0:3:1:3 up up
ds-0/0/0:3:1:4 up up
ds-0/0/0:3:1:5 up up
ds-0/0/0:3:1:6 up up
ds-0/0/0:3:1:7 up up
ds-0/0/0:3:1:8 up up
ds-0/0/0:3:1:9 up up
ds-0/0/0:3:1:10 up up
ds-0/0/0:3:1:11 up up
ds-0/0/0:3:1:12 up up
ds-0/0/0:3:1:13 up up
ds-0/0/0:3:1:14 up up
ds-0/0/0:3:1:15 up up
To verify that your channelized IQ interfaces are working as expected, use the show interfaces command. Use the show interfaces controller command to find the name of the channelized interface you want to view; then include this channelized name (for example, ct3-0/0/0:3) as an option with the show interfaces command.
The next section provides sample show interfaces output for each of the major interface types configured in this example: