Summary of BGP Configuration Statements > path-selection

Syntax

path-selection {

    (cisco-non-deterministic | always-compare-med | external-router-id); 

    med-plus-igp {

        igp-multiplier number;

        med-multiplier number;

    }

}

Hierarchy Level

[edit logical-routers logical-router-name protocols bgp],

[edit logical-routers logical-router-name routing-instances routing-instance-name

    protocols bgp],

[edit protocols bgp],

[edit routing-instances routing-instance-name protocols bgp]

Release Information

Statement introduced before JUNOS Release 7.4.

med-plus-igp option introduced in JUNOS Release 8.1.

Description

Configure BGP path selection.

Default

If the path-selection statement is not included in the configuration, only the MEDs of routes that have the same peer ASs are compared.

Options

cisco-non-deterministic—Configure routing table path selection so that it is performed using the same nondeterministic behavior as the Cisco IOS software. The active path is always first. All inactive, but eligible, paths follow the active path and are maintained in the order in which they were received, with the most recent path first. Ineligible paths remain at the end of the list.

always-compare-med—Always compare MEDs whether or not the peer ASs of the compared routes are the same.

NOTE: We recommend that you configure the always-compare-med option.

external-router-id—Compare the router ID between external BGP paths to determine the active path.

med-plus-igp—Add the IGP cost to the next-hop destination to the MED before comparing MED values for path selection.

igp-multiplier number—The multiplier value for the IGP cost to a next-hop address.
Range: 1 through 1000
Default: None

med-multiplier number—The multiplier value for the MED calculation.
Range: 1 through 1000
Default: None

Usage Guidelines

See Configuring Routing Table Path Selection.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.