[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

J-series Physical Interfaces

Table 8 lists the physical interfaces that are supported on the J-series routing platform.

Table 8: J-series Physical Interfaces

Physical Interface

Syntax

PIM

Asynchronous Transfer Mode-over-asymmetrical DSL (ATM-over-ADSL)

at-pim/0/port

ADSL (Annex A and B)

ATM-over-symmetric high-speed DSL (ATM-over-SHDSL)

at-pim/0/port

G.SHDSL (Annex A and B)

B-channel

Basic Rate Interface (BRI)

D-channel

Dialer

bc-pim/0/port

br-pim/0/port

dc-pim/0/portpim

dlnumber

Integrated Services Digital Network (ISDN)

E1

e1-pim/0/port

E1

E3

e3-pim/0/port

E3

Fast Ethernet

fe-pim/0/port

Fast Ethernet

Point-to-Point Protocol over Ethernet (PPPoE)

pp0

Fast Ethernet

Serial (RS-232, RS-422/449, EIA-530, V.35, and X.21)

se-pim/0/port

Serial

T1

t1-pim/0/port

T1 (all)

T3

t3-pim/0/port

T3 (all)

Note: ADSL interfaces and SHDSL interfaces are supported on the J-series routing platform only. Both interfaces are configured over an underlying ATM interface. For more information, see ATM Interface Operational Mode Commands.

Note: Point-to-Point Protocol over Ethernet (PPPoE) interfaces (pp0) are supported on the J-series routing platform only. A PPPoE interface is configured over an underlying Fast Ethernet interface. For more information, see PPPoE Interface Operational Mode Commands.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]