JUNOS 8.2 Interfaces Command Reference

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Ethernet Interface Operational Mode Commands

Table 23 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot aggregated Ethernet, Fast Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces. Commands are listed in alphabetical order.

Table 23: Ethernet Interface Operational Mode Commands

Task	Command
Clear Operations, Administration, and Monitoring (OAM) statistics link fault management statistics for Ethernet interfaces.	clear oam ethernet link-fault-management statistics
Display status information about aggregated Fast Ethernet or Gigabit Ethernet router interfaces.	show interfaces (Aggregated Ethernet)
Display status information about Fast Ethernet interfaces.	show interfaces (Fast Ethernet)
Display status information about Gigabit Ethernet router interfaces.	show interfaces (Gigabit Ethernet)
Display status information about 10-Gigabit Ethernet router interfaces.	show interfaces (10-Gigabit Ethernet)
Display the transceiver temperature, laser bias current, laser output power, receive optical power, and related alarms for 10-Gigabit Ethernet dense wavelength-division multiplexing (DWDM) interfaces.	show interfaces diagnostics optics (10-Gigabit Ethernet)
Display MAC address information for Gigabit Ethernet router interfaces.	show interfaces mac-database (Gigabit Ethernet)
Display Link Aggregation Control Protocol (LACP) information for aggregated, Fast Ethernet, or Gigabit Ethernet router interfaces.	show lacp interfaces
Display OAM fault management statistics for Ethernet interfacse.	show oam ethernet link-fault-management

For more information about monitoring and troubleshooting Ethernet interfaces, see “Investigate Fast Ethernet and Gigabit Ethernet Interfaces” in the JUNOS Interfaces Operations Guide.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]