bandwidth

Syntax

bandwidth (bandwidth | ctnumber bandwidth);

Hierarchy Level

[edit logical-routers logical-router-name protocols l2circuit neighbor address interface 
interface-name],

[edit protocols l2circuit neighbor address interface interface-name]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Specify bandwidth allocation for a Layer 2 circuit or for the class types of a Layer 2 circuit.

Options

bandwidth—Configure the bandwidth in bits per second for the Layer 2 circuit. You cannot configure the bandwidth for the Layer 2 circuit and for the class types at the same time.

ctnumber bandwidth—Configure the bandwidth in bits per second for a class type on the Layer 2 circuit. You can configure bandwidth for up to 4 class types (ct0, ct1, ct2, ct3) per Layer 2 circuit. If you configure the class types, you must configure them in order, starting with class type ct0.

Usage Guidelines

See Configuring Bandwidth Allocation and Call Admission Control.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.