neighbor

Syntax

neighbor address {

    interface interface-name {

        bandwidth (bandwidth | ctnumber bandwidth);

        community community-name;

        (control-word | no-control-word);

        description text;

        mtu mtu-number;

        protect-interface interface-name;

        psn-tunnel-endpoint address;

        virtual-circuit-id identifier;

    }

}

Hierarchy Level

[edit logical-routers logical-router-name protocols l2circuit],

[edit protocols l2circuit]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Each Layer 2 circuit is represented by the logical interface connecting the local provider edge (PE) router to the local customer edge (CE) router. All the Layer 2 circuits using a particular remote PE router designated for remote CE routers are listed under the neighbor statement (neighbor designates the PE router). Each neighbor is identified by its IP address and is usually the end-point destination for the LSP tunnel (transporting the Layer 2 circuit).

Options

address—IP address of a neighboring router.

The remaining statements are explained separately.

Usage Guidelines

See Configuring the Neighbor and Interface for the Layer 2 Circuit.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.