show interfaces destination-class
Syntax
show interfaces destination-class(all| destination-class-namelogical-interface-name)Release Information
Command introduced before JUNOS Release 7.4.
alloption introduced in JUNOS Release 8.0Description
Display information about interfaces grouped by destination class.
Options
all—Display information about all configured destination classes.
destination-class-name—Name of a logical grouping of prefixes that count packets having the destination address matching those prefixes. Whenever a destination class is specified, you must also specify a particular logical interface, not all interfaces.
logical interface-name—Name of a logical interface.Additional information
For interfaces that carry IPv4, IPv6, or Multiprotocol Label Switching (MPLS) traffic, you can maintain packet counts based on the entry and exit points for traffic passing through your network. Entry and exit points are identified by source and destination prefixes grouped into sets defined as source classes and destination classes. For more information, see the JUNOS Network Interfaces Configuration Guide.
Required Privilege Level
List of Sample Output
show interfaces destination-class allOutput Fields
Table 13 lists the output fields for the
show interfaces descriptioncommand. Output fields are listed in the approximate order in which they appear.
Name of destination class usage (DCU) counters per class for this interface.
show interfaces destination-class all
user@host> show interfaces destination-class allLogical interface so-4/0/0.0Packets BytesDestination class (packet-per-second) (bits-per-second)gold 0 0( 0) ( 0)silver 0 0( 0) ( 0)Logical interface so-0/1/3.0Packets BytesDestination class (packet-per-second) (bits-per-second)gold 0 0( 0) ( 0)silver 0 0( 0) ( 0)