show interfaces source-class
Syntax
show interfaces source-class(all| destination-class-name logical-interface-name)Release Information
Command introduced before JUNOS Release 7.4.
alloption introduced in JUNOS Release 8.0.Description
Display information about interfaces grouped by source class.
Options
all—Display information about all configured source classes.
source-class-name—Name of a logical grouping of prefixes that count packets having the source address matching those prefixes.
interface-name—Name of a logical interface.Additional Information
For interfaces that carry IPv4, IPv6, or Multiprotocol Label Switching (MPLS) traffic, you can maintain packet counts based on the entry and exit points for traffic passing through your network. Entry and exit points are identified by source and destination prefixes grouped into sets defined as source classes and destination classes. For more information, see the JUNOS Network Interfaces Configuration Guide.
Required Privilege Level
List of Sample Output
show interfaces source-class allOutput Fields
Table 21 lists the output fields for the
show interfaces source-classcommand. Output fields are listed in the approximate order in which they appear.
Source class usage (SCU) counters per class for this interface.
show interfaces source-class all
user@host> show interfaces source-class allLogical interface so-0/1/0.0Packets BytesSource class (packet-per-second) (bits-per-second)gold 1928095 161959980( 889) ( 597762)bronze 0 0( 0) ( 0)silver 0 0( 0) ( 0)Logical interface so-0/1/3.0Packets BytesSource class (packet-per-second) (bits-per-second)gold 0 0( 0) ( 0)bronze 0 0( 0) ( 0)silver 116113 9753492( 939) ( 631616)