Checking Your Work
To verify proper operation of traffic engineered Layer 2 circuits, use the following command:
show route table mpls.0 detailOn Router PE1, you can see that ATM traffic is part of the
goldcommunity that has a value of103:1and is associated with LSP 1. Likewise, Frame Relay traffic is part of thesilvercommunity that has a value of103:2and is associated with LSP 2:user@PE1>show route table mpls.0 detailmpls.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)at-1/1/0.32(1 entry, 1 announced)*L2CKT Preference: 7Next hop: 192.168.27.9 via so-1/1/0.0 weight 1, selectedLabel-switched-path lsp1Label operation: Push 100032 Offset: -4Next hop: via so-0/0/1.0 weight 1Label-switched-path lsp2Label operation: Push 100032 Offset: -4Protocol next hop: 10.255.17.4Push 100032 Offset: -4Indirect next hop: 8576bd0 300State: <Active Int>Age: 7:18Task: Common L2 VCAnnouncement bits (2): 0-KRT 1-Common L2 VCAS path: ICommunities: 103:1# This is thegoldcommunity.so-1/1/1.512(1 entry, 1 announced)*L2CKT Preference: 7Next hop: 192.168.27.9 via so-1/1/0.0 weight 1Label-switched-path lsp1Label operation: Push 100048 Offset: -4Next hop: via so-0/0/1.0 weight 1, selectedLabel-switched-path lsp2Label operation: Push 100048 Offset: -4Protocol next hop: 10.255.17.4Push 100048 Offset: -4Indirect next hop: 860f1f8 293State: <Active Int>Age: 5:15Task: Common L2 VCAnnouncement bits (2): 0-KRT 1-Common L2 VCAS path: ICommunities: 103:2# This is thesilvercommunity.