show pppoe version

Syntax

show pppoe version

Release Information

Command introduced before JUNOS Release 7.4.

Description

(J-series routing platform only) Display version information about PPPoE.

Required Privilege Level

view

List of Sample Output

show pppoe version

Output Fields

Table 45 lists the output fields for the show pppoe version command. Output fields are listed in the approximate order in which they appear.



Table 45: show pppoe version Output Fields

Field Name	Field Description
version n	PPPoE version number and RFC. For example, version 1, rfc 2516.
PPPoE protocol	Shows whether the protocol is enabled or disabled.
Maximum Sessions	Maximum active sessions supported per router. The default is 256 sessions.
PADI resend timeout	Initial time, in seconds, that the router waits to receive a PADO packet for the PADI packet sent. This timeout doubles for each successive PADI packet sent.
PADR resend timeout	Initial time, in seconds, that the router waits to receive a PADS packet for the PADR packet sent. This timeout doubles for each successive PADR packet sent.
Max resend timeout	Maximum value, in seconds, that the PADI or PADR resend timer can accept. The maximum value is 64.
Max Configured AC timeout	Time, in seconds, within which the configured access concentrator must respond.




show pppoe version

user@host> show pppoe version

Point-to-Point Protocol Over Ethernet, version 1. rfc2516

   PPPoE protocol               = Enabled

   Maximum Sessions             = 256

   PADI resend timeout          = 2 seconds

   PADR resend timeout          = 16 seconds

   Max resend timeout           = 64 seconds

   Max Configured AC timeout    = 4 seconds