show pppoe interfaces

Syntax

show pppoe interfaces 

<brief | detail | extensive>

<pp0.logical>

Release Information

Command introduced before JUNOS Release 7.4.

Description

(J-series routing platform only) Displays session-specific information about PPPoE interfaces.

Options

none—Display interface information for all PPPoE interfaces.

brief | detail | extensive—(Optional) Display the specified level of output.

pp0.logical—(Optional) Name of an interface. The logical unit number can be a value from 0 to 16385.

Required Privilege Level

view

List of Sample Output

show pppoe interfaces
show pppoe interfaces brief
show pppoe interfaces detail
show pppoe interfaces extensive

Output Fields

Table 43 lists the output fields for the show pppoe interfaces command. Output fields are listed in the approximate order in which they appear.



Table 43: show pppoe interfaces Output Fields

Field Name	Field Description	Level of Output
Logical Interface
Logical interface	Name of the logical interface.	All levels
Index	Index number of the logical interface, which reflects its initialization sequence.	detail extensive none
State	State of the logical interface: up or down.	detail extensive none
Session ID	Session ID.	detail extensive none
Service name	Type of service required (can be used to indicate an ISP name or a class or quality of service).	detail extensive none
Configured AC name	Configured access concentrator name.	detail extensive none
Session AC name	Name of the access concentrator.	detail extensive none
AC MAC address	MAC address of the access concentrator.	detail extensive none
Auto-reconnect timeout	Time after which to try to reconnect after a PPPoE session is terminated, in seconds.	detail extensive none
Idle timeout	Length of time (in seconds) that a connection can be idle before disconnecting.	detail extensive none
Underlying interface	Interface on which PPPoE is running.	All levels
Packet Type	Number of packets sent and received during the PPPoE session, categorized by packet type and packet errors: PADI—PPPoE Active Discovery Initiation packets. PADO—PPPoE Active Discovery Offer packets. PADR—PPPoE Active Discovery Request packets. PADS—PPPoE Active Discovery Session-Confirmation packets. PADT—PPPoE Active Discovery Termination packets. Service name error—Packets for which the Service-Name request could not be honored. AC system error—Packets for which the access concentrator experienced an error in performing the host request. For example, the host had insufficient resources to create a virtual circuit. Generic error—Packets that indicate an unrecoverable error occurred. Malformed packets—Malformed or short packets that caused the packet handler to discard the frame as unreadable. Unknown packets—Unrecognized packets.	extensive
Timeout	Information about timeouts that occurred during the PPPoE session: PADI—No PADO packet has been received within the timeout period. PADO—No PADR packet has been received within the timeout period. (This value is always zero and is not supported.) PADR—No PADS packet has been received within the timeout period.	extensive




show pppoe interfaces

user@host> show pppoe interfaces

pp0.0 Index 66

  State: Down, Session ID: None,

  Service name: None, Configured AC name: sapphire,

  Session AC name: None, AC MAC address: 00:00:00:00:00:00,

  Auto-reconnect timeout: 100 seconds, Idle timeout: Never,

  Underlying interface: at-5/0/0.0 Index 71

show pppoe interfaces brief

user@host> show pppoe interfaces brief

Interface    Underlying interface   State        AC 

pp0.0        at-5/0/0.0             Down         None 

             None                   None         00:00:00:00:00:00 

show pppoe interfaces detail

user@host> show pppoe interfaces detail

pp0.0 Index 66

  State: Down, Session ID: None,

  Service name: None, Configured AC name: sapphire,

  Session AC name: None, AC MAC address: 00:00:00:00:00:00,

  Auto-reconnect timeout: 100 seconds, Idle timeout: Never,

  Underlying interface: at-5/0/0.0 Index 71

show pppoe interfaces extensive

user@host> show pppoe interfaces extensive

pp0.0 Index 66

  State: Down, Session ID: None,

  Service name: None, Configured AC name: sapphire,

  Session AC name: None, AC MAC address: 00:00:00:00:00:00,

  Auto-reconnect timeout: 100 seconds, Idle timeout: Never,

  Underlying interface: at-5/0/0.0 Index 71

  PacketType                       Sent         Received

    PADI                              0                0

    PADO                              0                0

    PADR                              0                0

    PADS                              0                0

    PADT                              0                0

    Service name error                0                0

    AC system error                   0                0

    Generic error                     0                0

    Malformed packets                 0                0

    Unknown packets                   0                0

  Timeout

    PADI                              0

    PADO                              0

    PADR                              0