show interfaces snmp-index

Syntax

show interfaces snmp-index snmp-index

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display information for the interface with the specified SNMP index.

Options

The snmp-index keyword can also be entered following the interface interface-name command and can be used with other keywords or arguments. For options for specific interfaces, see the other chapters in this manual.

Additional Information

Output from both the show interfaces interface-name detail and the show interfaces interface-name extensive command includes all the information displayed in the output from the show interfaces snmp-index command.

Required Privilege Level

view

List of Sample Output

show interfaces snmp-index

Output Fields

The output fields from the show interfaces snmp-index snmp-index command are identical to those produced by the show interfaces interface-name command. For a description of output fields, see the other chapters in this manual.

show interfaces snmp-index

user@host> show interfaces snmp-index 33 

Physical interface: so-2/1/1, Enabled, Physical link is Down

  Interface index: 149, SNMP ifIndex: 33

  Link-level type: PPP, MTU: 4474, Clocking: Internal, SONET mode, Speed: OC48, 
  Loopback: None, FCS: 16, Payload scrambler: Enabled

  Device flags   : Present Running Down

  Interface flags: Hardware-Down Point-To-Point SNMP-Traps 16384

  Link flags     : Keepalives

  CoS queues     : 8 supported

  Last flapped   : 2005-06-15 11:45:57 PDT (05:38:43 ago)

  Input rate     : 0 bps (0 pps)

  Output rate    : 0 bps (0 pps)

  SONET alarms   : LOL, PLL, LOS

  SONET defects  : LOL, PLL, LOF, LOS, SEF, AIS-L, AIS-P