show interfaces controller (Channelized T3 IQ)

Syntax

show interfaces controller ct3-fpc/pic/slot

Release Information

Command introduced before JUNOS Release 7.4.

Description

(M-series and T-series routing platforms only) Display the interface names of the specified physical channelized T3 IQ interface and the channels configured on it. (You can include wildcard characters in the interface name to display more than one channelized T3 IQ interface. See Interface Types.)

Required Privilege Level

view

List of Sample Output

show interfaces controller (T3 IQ)

Output Fields

Controller—Name of the T3 IQ interface.

Admin—Whether the interface is turned on (up) or off (down).

Link—Status of the link: up or down.

show interfaces controller
(T3 IQ)

The following sample output is based on the example displayed in Figure 6.

user@host> show interfaces controller ct3-0/0/1

Controller                                                           Admin Link

ct3-0/0/1                                                            up    up

    t1-0/0/1:1                                                       up    up

    ct1-0/0/1:2                                                      up    up

        ds-0/0/1:2:1                                                 up    up

        ds-0/0/1:2:2                                                 up    up

        ds-0/0/1:2:3                                                 up    up

    t1-0/0/1:3 

    ...                                                              up    down

    t1-0/0/1:10                                                      up    up

    ct1-0/0/1:11                                                     up    up

    ...

    ct1-0/0/1:28                                                     up    up