show interfaces (Channelized STM1 IQ)
Syntax
show interfaces (type-fpc/pic/port<:channel><:channel>)
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>
Release Information
Command introduced before JUNOS Release 7.4.
Description
(M-series and T-series routing platforms only) Display status information about the specified channelized STM1 IQ interface. (You can include wildcard characters in the interface name to display more than one channelized STM1 IQ interface. See Interface Types.)
Options
type-fpc/pic/port:channel:channel—Interface type with optional corresponding channel levels. The interface type can be one of the following:
-
type-fpc/pic/port—For the physical channelized STM1 IQ interface,typeiscstm1.For the clear channel,interface-typeisso. For channelization, the STM1 IQ interface must be converted to interface typecau4. -
type-fpc/pic/port:channel—At the first level of channelization,typecan bece1ore1 (clear channel or fractional channel fromcau4). -
type-fpc/pic/port:channel:channel—At the second level of channelization,typeisds(fromce1).
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index of the interface.
statistics—(Optional) Display static interface statistics.
Required Privilege Level
List of Sample Output
show interfaces (Channelized STM1 IQ) (Physical)show interfaces (Channelized AU-4) (Physical)show interfaces (Channelized E1) (Physical)show interfaces (NxDS0)
Output Fields
Table 78 lists the output fields for the show interfaces (all Channelized STM1 interfaces) command. Output fields are listed in the approximate order in which they appear.
Sample Figure
The sample output that follows is based on Figure 5, which shows two configuration examples of channelized STM1 IQ interfaces. Path number 11 corresponds to the sample output displayed.
show interfaces
(Channelized STM1 IQ) (Physical)
user@host> show interfaces cstm1-0/0/0
Physical interface: cstm1-0/0/0, Enabled, Physical link is Up
Interface index: 146, SNMP ifIndex: 35
Link-level type: Frame-relay, Controller, Clocking: Internal, SDH mode,
Speed: OC3, Loopback: None, Parent: None
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Link flags : Keepalives DTE
ANSI LMI settings: n391dte 6, n392dte 3, n393dte 4, t391dte 10 seconds
LMI: Input: 51700 (00:00:02 ago), Output: 51701 (00:00:02 ago)
DTE statistics:
Enquiries sent : 43186
Full enquiries sent : 8515
Enquiry responses received : 43185
Full enquiry responses received : 8515
DCE statistics:
Enquiries received : 0
Full enquiries received : 0
Enquiry responses sent : 0
Full enquiry responses sent : 0
Common statistics:
Unknown messages received : 0
Asynchronous updates received : 0
Out-of-sequence packets received : 0
Keepalive responses timedout : 0
Nonmatching DCE-end DLCIs:
2
Last flapped : 2003-02-06 15:01:56 PST (07:15:06 ago)
...
show interfaces
(Channelized AU-4) (Physical)
user@host> show interfaces cau4-0/0/0
Physical interface: cau4-0/0/0, Enabled, Physical link is Up
Interface index: 147, SNMP ifIndex: 36
Link-level type: Controller, Clocking: Internal, SDH mode, Speed: OC3,
Loopback: None, Parent: cstm1-0/0/0 Interface index 146
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Link flags : None
Last flapped : 2003-02-06 19:36:31 PST (02:40:42 ago)
SDH alarms : None
SDH defects : None
...
show interfaces
(Channelized E1) (Physical)
user@host> show interfaces ce1-0/0/0:11
Physical interface: ce1-0/0/0:11, Enabled, Physical link is Up
Interface index: 169, SNMP ifIndex: 288
Link-level type: Frame-relay, Controller, Clocking: Internal, Speed: E1,
Loopback: None, Framing: G704, Parent: cau4-0/0/0 Interface index 147
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Link flags : Keepalives DTE
ANSI LMI settings: n391dte 6, n392dte 3, n393dte 4, t391dte 10 seconds
LMI: Input: 51700 (00:00:02 ago), Output: 51701 (00:00:02 ago)
DTE statistics:
Enquiries sent : 43186
Full enquiries sent : 8515
Enquiry responses received : 43185
Full enquiry responses received : 8515
DCE statistics:
Enquiries received : 0
Full enquiries received : 0
Enquiry responses sent : 0
Full enquiry responses sent : 0
Common statistics:
Unknown messages received : 0
Asynchronous updates received : 0
Out-of-sequence packets received : 0
Keepalive responses timedout : 0
Nonmatching DCE-end DLCIs:
2
Last flapped : 2003-02-06 22:05:23 PST (00:13:45 ago)
DS1 alarms : None
DS1 defects : None
SDH alarms : None
SDH defects : None
...
show interfaces
(NxDS0)
user@host> show interfaces ds-0/0/0:11:1
Physical interface: ds-0/0/0:11:1, Enabled, Physical link is Up
Interface index: 170, SNMP ifIndex: 289
Link-level type: PPP, MTU: 1504, Clocking: Internal, Speed: 640kbps,
Loopback: Illegal, FCS: 16,
Parent: ce1-0/0/0:11Interface index 169
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Link flags : Keepalives
Keepalive settings: Interval 10 seconds, Up-count 1, Down-count 3
Keepalive: Input: 0 (never), Output: 0 (never)
LCP state: Conf-req-sent
...
Logical interface ds-0/0/0:11:1.0 (Index 77) (SNMP ifIndex 290)
Flags: Hardware-Down Point-To-Point SNMP-Traps Encapsulation: PPP
Bandwidth: 0
Protocol inet, MTU: 1500
Flags: Protocol-Down
Addresses, Flags: Dest-route-down Is-Preferred Is-Primary
Destination: 10.134.1.0/30, Local: 10.134.1.1
DLCI 100
Flags: Active, Dce-configured
Total down time: 0 sec, Last down: Never
Traffic statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
...