Table of Contents

About This Guide
Objectives
Audience
Using the Indexes
Using the Examples in This Manual
Merging a Full Example
Merging a Snippet
Documentation Conventions
Related Juniper Networks Documentation
Documentation Feedback
Requesting Support
Network Interfaces Configuration Statements
[edit interfaces] Hierarchy Level
[edit logical-routers] Hierarchy Level
[edit protocols connections] Hierarchy Level
[edit protocols lacp] Hierarchy Level
[edit protocols ppp] Hierarchy Level
[edit protocols vrrp] Hierarchy Level
[edit system processes] Hierarchy Level
Interfaces Overview
Types of Interfaces
Permanent Interfaces
Transient Interfaces
Services Interfaces
Interface Encapsulations
Interface Descriptors
Interface Naming
Physical Part of an Interface Name
Logical Part of an Interface Name
Separators in an Interface Name
Channel Part of an Interface Name
Interface Naming for a Routing Matrix
Chassis Interface Naming
Examples: Interface Naming
How Interface Configurations Are Displayed
Interface and Router Clock Sources
Configuring an External Synchronization Interface
Configuring Physical Interface Properties
Specifying an Aggregated Interface
Adding an Interface Description to the Configuration
Example: Adding an Interface Description to the Configuration
Configuring the Link Characteristics
Configuring the Media MTU
Configuring Interface Encapsulation
Configuring the Encapsulation on a Physical Interface
Encapsulation Capabilities
Example: Configuring the Encapsulation on a Physical Interface
Configuring the PPP Challenge Handshake Authentication Protocol
Assigning an Access Profile to an Interface
Configuring the Local Name
Configuring Passive Mode
Example: Configuring the PPP Challenge Handshake Authentication Protocol
Monitoring a PPP Session
Tracing Operations of the PPPD Process
Configuring PPP Address and Control Field Compression
Configuring the PPP Protocol Field Compression
Configuring the Interface Speed
Management Ethernet Interface
Fast Ethernet Interface
Configuring Keepalives
Configuring the Clock Source
Configuring the Router as a DCE
Configuring Receive and Transmit Leaky Bucket Properties
Configuring Accounting for the Physical Interface
Applying an Accounting Profile to the Physical Interface
Example: Applying an Accounting Profile to the Physical Interface
Interface Diagnostics
Configuring Loopback Testing
Interface Diagnostics
Starting and Stopping a BERT Test
Example: Configuring Bit Error Rate Testing
Tracing Operations of an Individual Router Interface
Damping Interface Transitions
Configuring Multiservice Physical Interface Properties
Enabling or Disabling SNMP Notifications on Physical Interfaces
Disabling a Physical Interface
Example: Disabling a Physical Interface
Configuring Logical Interface Properties
Specifying the Logical Interface Number
Configuring Logical Router Interface Properties
Example: Configuring Logical Router Interface Properties
Adding a Logical Unit Description to the Configuration
Configuring a Point-to-Point Connection
Configuring a Multipoint Connection
Configuring Accounting for the Logical Interface
Applying an Accounting Profile to the Logical Interface
Example: Applying an Accounting Profile to the Logical Interface
Configuring the Interface Bandwidth
Enabling or Disabling SNMP Notifications on Logical Interfaces
Configuring Interface Encapsulation
Configuring the Encapsulation on a Logical Interface
Disabling a Logical Interface
Configuring Protocol Family and Address Interface Properties
Configuring the Protocol Family
IPv6 Introduction
IPv4-to-IPv6 Transition
Configuring the Interface Address
Configuring the IPv6 Address on an Interface
Configuring IPCP Options
Configuring an IP Address for an Interface
Negotiating an IP Address Assignment from the Remote End
Configuring an Interface to Be Unnumbered
Assigning a Destination Profile to the Remote End
Configuring LLC2 Options
Configuring LLC2 Properties
Configuring DLSw Ethernet Redundancy Using LLC2 Properties
Example: Configuring LLC Options on an Interface
Example: Configuring DLSw Ethernet Redundancy
Configuring an Unnumbered Interface
Example: Configuring an Unnumbered Interface
Setting the Protocol MTU
Disabling the Removal of Address and Control Bytes
Disabling the Transmission of Redirect Messages on an Interface
Configuring Default, Primary, and Preferred Addresses and Interfaces
Configuring the Primary Interface for the Routing Platform
Configuring the Primary Address for an Interface
Configuring the Preferred Address for an Interface
Applying Policers
Applying Aggregate Policers
Example: Applying Aggregate Policers
Applying a Filter to an Interface
Defining Interface Groups in Firewall Filters
Filter-Based Forwarding on the Output Interface
Example: Applying a Filter to an Interface
Configuring Unicast RPF
Configuring Unicast RPF Strict Mode
Configuring Unicast RPF Loose Mode
Unicast RPF and Default Routes
Unicast RPF Behavior with a Default Route
Unicast RPF Behavior Without a Default Route
Unicast RPF with Routing Asymmetry
Configuring Unicast RPF on a VPN
Example: Configuring Unicast RPF on a VPN
Example: Configuring Unicast RPF
Enabling Source Class and Destination Class Usage
Examples: Enabling Source Class and Destination Class Usage
Configuring Circuit and Translational Cross-Connects
Defining the Encapsulation for Switching Cross-Connects
Configuring PPP or Cisco HDLC Circuits
Configuring ATM Circuits
Configuring Frame Relay Circuits
Configuring Ethernet CCC Circuits
Configuring Ethernet VLAN Circuits
Defining the Connection for Switching Cross-Connects
Configuring MPLS for Switching Cross-Connects
Examples: Configuring Switching Cross-Connects
Configuring a CCC over Frame Relay Encapsulated Interfaces
Configuring a TCC
Configuring CCC over Aggregated Ethernet
Configuring a Remote LSP CCC over Aggregated Ethernet
Tracing Interface Operations
Tracing Operations of an Individual Router Interface
Tracing Operations of the Interface Process
Configuring ATM Interfaces
ATM1 Physical and Logical Configuration Hierarchies
ATM2 IQ Physical and Logical Configuration Hierarchies
Supported Features on ATM1 and ATM2 IQ Interfaces
Configuring ATM Interfaces
Configuring Communication with Directly Attached ATM Switches and Routers
Example: Configuring Communication with Directly Attached ATM Switches and Routers
Enabling ILMI for Cell Relay
Example: Enabling ILMI for Cell Relay
Enabling Passive Monitoring on ATM Interfaces
Removing MPLS Labels from Incoming Packets
Configuring the ATM PIC Type
Example: Configuring the ATM PIC Type
Configuring ATM Cell-Relay Promiscuous Mode
Examples: Configuring ATM Cell-Relay Promiscuous Mode
Configuring the Maximum Number of ATM1 VCs on a VP
Configuring Layer 2 Circuit Transport Mode
Examples: Configuring IQ Layer 2 Circuit Transport Mode
Configuring Layer 2 Circuit Cell-Relay Promiscuous Mode
Example: Configuring Layer 2 Circuit Cell-Relay Promiscuous Mode
Configuring Layer 2 Circuit Trunk Mode Scheduling
Example: Configuring Layer 2 Circuit Trunk Mode Scheduling
Configuring CoS Queues in Layer 2 Circuit Trunk Mode
Example: Configuring CoS Queues in Layer 2 Circuit Trunk Mode
Configuring the Layer 2 Circuit Cell-Relay Cell Maximum
Class-Based Cell Bundling
Configuring the OAM F4 Cell Flows
Defining Virtual Path Tunnels
Configuring a Point-to-Point ATM1 or ATM2 IQ Connection
Configuring a Point-to-Multipoint ATM1 or ATM2 IQ Connection
Configuring a Multicast-Capable ATM1 or ATM2 IQ Connection
Configuring Inverse ATM1 or ATM2 ARP
Defining the ATM Traffic-Shaping Profile
Configuring ATM CBR
Configuring ATM2 IQ Real-Time VBR
Configuring ATM VBR
Specifying ATM1 Shaping Values
Example: Specifying ATM1 Shaping Values
Specifying ATM2 IQ Shaping Values
Configuring the ATM1 Queue Length
Configuring the ATM2 IQ EPD Threshold
Example: Configuring the ATM2 IQ EPD Threshold
Configuring Two EPD Thresholds per Queue
Configuring the ATM2 IQ Transmission Weight
Defining the ATM OAM F5 Loopback Cell Period
Configuring the ATM OAM F5 Loopback Cell Threshold
Configuring ATM Interface Encapsulation
Configuring an ATM1 Cell-Relay Circuit
Examples: Configuring an ATM1 Cell-Relay Circuit
Configuring PPP over ATM2 Encapsulation
Example: Configuring PPP over ATM2 IQ Encapsulation
Configuring E3 and T3 Parameters on ATM Interfaces
Configuring SONET/SDH Parameters on ATM Interfaces
Configuring ATM2 IQ VC Tunnel CoS Components
Configuring Linear RED Profiles
Configuring an ATM Scheduler Map
Enabling Eight Queues on ATM2 IQ Interfaces
Example: Enabling Eight Queues on T-series and M320 Platforms
Configuring VC CoS Mode
Enabling the PLP Setting to Be Copied to the CLP Bit
Configuring ATM CoS on the Logical Interface
Example: Configuring ATM2 IQ VC Tunnel CoS Components
Examples: Configuring ATM1 Interfaces
Examples: Configuring ATM2 IQ Interfaces
Configuring ATM-over-ADSL Interfaces
Configuring ATM-over-SHDSL Interfaces
Configuring ATM Mode on the PIM
Configuring SHDSL Operating Mode on an ATM Physical Interface
Configuring Encapsulation on the ATM Physical Interface
Configuring Logical Interface Properties
Example: Configuring an ATM-over-SHDSL Interface
Verifying an ATM-over-SHDSL Interface Configuration
Channelized Interfaces Overview
Channelized Interface Capabilities
Data-Link Connection Identifiers on Channelized Interfaces
Clock Sources on Channelized Interfaces
Channelized IQ Interface Properties
Structure of Channelized IQ PICs
Configuring Channelized E1 Interfaces
Configuring Channelized E1 IQ Interfaces
Configuring E1 IQ Interfaces
Configuring Fractional E1 IQ Interfaces
Example: Configuring Fractional E1 IQ Interfaces
Configuring NxDS0 IQ Interfaces
Example: Configuring an NxDS0 IQ Interface
Configuring Channelized E1 Interfaces
Configuring Channelized E1 Interface Properties
Example: Configuring Channelized E1 IQ Interfaces
Example: Configuring Channelized E1 Interfaces
Configuring Channelized OC3 IQ Interfaces
Partitions, OC Slices, Interface Types, and Time Slots
Configuring a Clear Channel
Configuring T3 IQ Interfaces
Example: Configuring T3 IQ Interfaces
Configuring T1 and NxDS0 Interfaces
Examples: Configuring T1 and NxDS0 IQ Interfaces
Setting Remote Loopback and Running BERT Tests on NxDS0 Interfaces
Configuring Fractional T1 IQ Interfaces
Example: Configuring Fractional T1 IQ Interfaces
Configuring Channelized OC12 Interfaces
Configuring Channelized OC12 IQ Interfaces (SONET Mode)
Configuring an OC12 IQ Interface
Configuring T3 IQ Interfaces
Example: Configuring T3 IQ Interfaces
Configuring OC3 IQ Interfaces
Example: Configuring OC3 IQ Interfaces
Configuring T1 IQ Interfaces
Example: Configuring T1 IQ Interfaces
Configuring NxDS0 IQ Interfaces
Example: Configuring NxDS0 IQ Interfaces
Configuring Fractional T1 IQ Interfaces
Examples: Configuring Fractional T1 IQ Interfaces
Configuring Channelized OC12 IQ Interfaces (SDH Mode)
Configuring Channelized OC12 IQ PIC for SDH Mode
Configuring an Unpartitioned SDH (VC-4-4C) Interface
Example: Configuring an Unpartitioned SDH (VC-4-4C) Interface
Configuring SDH (VC-4) Interfaces
Example: Configuring SDH (VC-4) Interfaces
Configuring Channelized AU-4 Interfaces
Example: Configuring Channelized AU-4 Interfaces
Configuring T3 or Channelized T3 Interfaces
Example: Configuring T3 or Channelized T3 Interfaces
Configuring T1 or Channelized T1 Interfaces
Example: Configuring T1 or Channelized T1 Interfaces
Configuring NxDS0 IQ Interfaces
Example: Configuring NxDS0 IQ Interfaces
Configuring Channelized OC12 Interfaces
Example: Configuring Channelized OC12 IQ Interfaces
Example: Configuring Channelized OC12 Interfaces
Configuring Channelized STM1 Interfaces
Configuring Channelized STM1 IQ Interfaces
Configuring an STM1 IQ Interface
Configuring E1 IQ Interfaces
Example: Configuring E1 IQ Interfaces
Configuring Fractional E1 IQ Interfaces
Example: Configuring Fractional E1 IQ Interfaces
Configuring an NxDS0 IQ Interface
Example: Configuring an NxDS0 IQ Interface
Example: Configuring Channelized STM1 IQ Interfaces
Configuring Channelized STM1 Interfaces
Configuring Channelized STM1 Interface Properties
Configuring Virtual Tributary Mapping of Channelized STM1 Interfaces
Example: Configuring Channelized STM1 Interfaces
Configuring Channelized T1 IQ Interfaces
Configuring Channelized T1 IQ Interfaces
Configuring T1 IQ Interfaces
Configuring Fractional T1 IQ Interfaces
Example: Configuring Fractional T1 IQ Interfaces
Configuring NxDS0 IQ Interfaces
Example: Configuring an NxDS0 IQ Interface
Configuring Payload Loopback
Configuring Channelized T1 Interface Properties
Example: Configuring Channelized T1 IQ Interfaces
Configuring Channelized T3 Interfaces
Configuring Channelized T3 IQ Interfaces
Configuring T3 IQ Interfaces
Configuring T1 IQ Interfaces
Example: Configuring T1 IQ Interfaces
Configuring Fractional T1 IQ Interfaces
Example: Configuring Fractional T1 IQ Interfaces
Configuring an NxDS0 IQ Interface
Example: Configuring an NxDS0 IQ Interface
Configuring Channelized DS3-to-DS0 Interfaces
Configuring Channelized DS3-to-DS1 Interfaces
Example: Configuring Channelized T3 IQ Interfaces
Examples: Configuring Channelized DS3-to-DS0 Interfaces
Examples: Configuring Channelized DS3-to-DS1 Interfaces
Configuring Discard Interfaces
Configuring E1 Interfaces
Configuring E1 BERT Properties
Configuring the E1 Frame Checksum
Configuring E1 Framing
Configuring the E1 Idle Cycle Flag
Configuring E1 Data Inversion
Configuring E1 Loopback Capability
Example: Configuring E1 Loopback Capability
Configuring E1 Start End Flags
Configuring Fractional E1 Time Slots
Example: Configuring Fractional E1 Time Slots
Configuring E3 Interfaces
Configuring E3 BERT Properties
Configuring the E3 CSU Compatibility Mode
Configuring the E3 Frame Checksum
Configuring the E3 Idle Cycle Flag
Configuring E3 Loopback Capability
Example: Configuring E3 Loopback Capability
Configuring E3 HDLC Payload Scrambling
Configuring the E3 Start End Flags
Configuring E3 IQ Unframed Mode
Configuring Ethernet Interfaces
Configuring Ethernet Physical Interface Properties
Enabling Ethernet MAC Address Filtering
Filtering Specific MAC Addresses
Configuring Ethernet Loopback Capability
Configuring Flow Control
Configuring the Link Characteristics
Configuring Gratuitous ARP
Adjusting the ARP Aging Timer
Configuring the Interface Speed
Configuring the Ingress Rate Limit
Configuring 802.1Q VLANs
Enabling VLAN Tagging
Binding a VLAN ID to a Logical Interface
Configuring VLAN Encapsulation
Example: Configuring VLAN Encapsulation
Configuring Extended VLAN Encapsulation
Example: Configuring Extended VLAN Encapsulation
Configuring Aggregated Ethernet Interfaces
Configuring Ethernet Link Aggregation
Setting the Number of Aggregated Ethernet Interfaces on the Chassis
Configuring Aggregated Ethernet LACP
Configuring the LACP Interval
Tracing LACP Operations
Example: Configuring Aggregated Ethernet LACP
Configuring Tagged Aggregated Ethernet Interfaces
Configuring Untagged Aggregated Ethernet Interfaces
Example: Configuring Untagged Aggregated Ethernet Interfaces
Configuring Aggregated Ethernet Link Speed
Configuring Aggregated Ethernet Minimum Links
Stacking and Rewriting Gigabit Ethernet IQ VLAN Tags
Stacking a VLAN Tag on All Tagged Frames Entering the Interface
Stacking a VLAN Tag on All Tagged Frames Exiting the Interface
Removing a VLAN Tag from All Tagged Frames Entering the Interface
Removing a VLAN Tag from All Tagged Frames Exiting the Interface
Configuring Frames with Particular TPIDs to Be Processed as Tagged Frames
Rewriting the VLAN Tag on All Tagged Frames Entering the Interface
Rewriting the VLAN Tag on All Tagged Frames Exiting the Interface
Configuring Stacked VLAN Tagging
Configuring Dual VLAN Tags
Examples: Stacking and Rewriting Gigabit Ethernet IQ VLAN Tags
Configuring TCC and Layer 2.5 Switching
Configuring VLAN TCC Encapsulation
Configuring an Ethernet TCC or VLAN TCC
Example: Configuring an Ethernet TCC or Extended VLAN TCC
Configuring Static ARP Table Entries
Example: Configuring Static ARP Table Entries
Configuring Unrestricted Proxy ARP
Enabling Passive Monitoring on Ethernet Interfaces
Configuring VRRP
Configuring Basic VRRP Support
Configuring VRRP Authentication
Configuring the Advertisement Interval for the VRRP Master Router
Modifying the Advertisement Interval in Seconds
Modifying the Advertisement Interval in Milliseconds
Configuring a Backup Router to Preempt the Master Router
Modifying the Preemption Hold-Time Value
Configuring an Interface to Accept Packets Destined for the Virtual IP Address
Configuring a Logical Interface to Be Tracked
Tracing VRRP Operations
Configuring the Silent Period
Configuring Passive ARP Learning for Backup VRRP Routers
Example: Configuring VRRP
Configuring Gigabit Ethernet Accounting and Policing
Configuring Gigabit Ethernet Policers
Configuring a Policer
Specifying an Input Priority Map
Specifying an Output Priority Map
Applying a Policer
Configuring MAC Address Filtering
Example: Configuring Gigabit Ethernet Policers
Configuring MAC Address Accounting
Configuring Gigabit Ethernet Autonegotiation
Configuring the Management Ethernet Interface
Configuring the MAC Address on the Management Ethernet Interface
Displaying the Internal Ethernet Interface
Configuring the 10-Gigabit Ethernet DWDM Interface Wavelength
Example: Configuring Fast Ethernet Interfaces
Example: Configuring Gigabit Ethernet Interfaces
Example: Configuring Aggregated Ethernet Interfaces
Configuring Frame Relay
Configuring Frame Relay Interface Encapsulation
Configuring the Frame Relay Encapsulation on a Physical Interface
Example: Configuring the Encapsulation on a Physical Interface
Configuring the Frame Relay Encapsulation on a Logical Interface
Configuring Frame Relay Control Bit Translation
Configuring the Media MTU
Setting the Protocol MTU
Configuring Frame Relay Keepalives
Configuring Tunable Keepalives for Frame Relay LMI
Configuring Inverse Frame Relay ARP
Configuring the Router as a DCE
Configuring Frame Relay DLCIs
Configuring a Point-to-Point Frame Relay Connection
Configuring a Point-to-Multipoint Frame Relay Connection
Configuring a Multicast-Capable Frame Relay Connection
Configuring ISDN Interfaces
Configuring ISDN Physical Interface Properties
Configuring an ISDN Interface to Screen Incoming Calls
Configuring ISDN Logical Interface Properties
Configuring an ISDN Dialer Interface as a Backup Interface
Example: Configuring an ISDN Interface as the Backup Interface
Applying the Dial-on-Demand Dialer Filter to the Dialer Interfaces
Example: Applying the Dialer Filter
Configuring Bandwidth on Demand
Configuring the Dialer Interface
Configuring the ISDN Interface
Example: Configuring Bandwidth on Demand
Configuring Dial-In and Callback
Configuring Dial-In
Disabling Dial-In
Configuring Callback
Example: Configuring Dial-In and Callback
Configuring Dialer Watch
Configuring the Dialer Interface
Configuring the Physical Interface
Example: Configuring Dialer Watch
Disabling ISDN Processes
Configuring the Loopback Interface
Example: Configuring the Loopback Interface
Configuring Point-to-Point Protocol over Ethernet
PPPoE Overview
PPPoE Interfaces
Fast Ethernet Interface
PPPoE Stages
PPPoE Discovery Stage
PPPoE Session Stage
Optional CHAP Authentication
Configuring PPPoE
Setting the Appropriate Encapsulation on the Interface
Configuring PPPoE Encapsulation on an Ethernet Interface
Configuring PPPoE Encapsulation on an ATM-over-ADSL Interface
Configuring a PPPoE Interface
Example: Configuring a PPPoE Interface
Verifying a PPPoE Configuration
Configuring Serial Interfaces
Configuring the Serial Line Protocol
Serial Interface Default Settings
EIA-530 Interface Default Settings
V.35 Interface Default Settings
X.21 Interface Default Settings
Invalid Serial Interface Statements
Invalid EIA-530 Interface Statements
Invalid V.35 interface Statements
Invalid X.21 Interface Statements
Configuring the Serial Clocking Mode
Inverting the Serial Interface Transmit Clock
Configuring the DTE Clock Rate
Configuring the Serial Idle Cycle Flag
Configuring the Serial Signal Handling
Configuring the Serial DTR Circuit
Configuring Serial Signal Polarities
Configuring Serial Loopback Capability
Example: Configuring Serial Loopback Capability
Configuring Serial Line Encoding
Configuring SONET/SDH Interfaces
Configuring SONET/SDH Physical Interface Properties
Configuring SONET/SDH Header Byte Values
Configuring an Incrementing STM ID
Configuring the SONET/SDH Frame Checksum
Configuring Channelized IQ SONET/SDH Loop Timing
Configuring SONET/SDH Loopback Capability
Example: Configuring SONET/SDH Loopback Capability
Configuring the SONET/SDH Path Trace Identifier
Configuring SONET/SDH HDLC Payload Scrambling
Configuring SONET/SDH RFC 2615 Support
Configuring SONET/SDH Defect Triggers to Be Ignored
Applying Up and Down Hold Timers to the Defect
Example: Configuring SONET/SDH Defects to Be Ignored
Configuring Virtual Tributary Mapping
Configuring APS and MSP
Configuring Basic APS Support
Example: Configuring Basic APS Support
Configuring Switching Between the Working and Protect Circuits
Configuring Revertive Mode
Configuring Unidirectional Switching Mode Support
Configuring APS Timers
Configuring Link PIC Redundancy
Example: Configuring Link PIC Redundancy
Configuring APS Load Sharing Between Circuit Pairs
Example: Configuring APS Load Sharing Between Circuit Pairs
Configuring the Media MTU
Enabling Passive Monitoring on SONET/SDH Interfaces
Removing MPLS Labels from Incoming Packets
Configuring the Clock Source
Configuring Receive and Transmit Leaky Bucket Properties
Damping Interface Transitions
Configuring Interface Encapsulation
Configuring the Encapsulation on a Physical Interface
Example: Configuring the Encapsulation on a Physical Interface
Configuring the Encapsulation on a Logical Interface
Example: Configuring SONET/SDH Interfaces
Configuring Aggregated SONET/SDH Interfaces
Configuring SONET/SDH Link Aggregation
Configuring Aggregated SONET/SDH Link Speed
Configuring Aggregated SONET/SDH Minimum Links
Configuring Filters or Sampling on Aggregated SONET/SDH Links
Examples: Configuring Filters or Sampling on Aggregated SONET/SDH Links
Example: Configuring Aggregated SONET/SDH Interfaces
Configuring T1 Interfaces
Configuring T1 BERT Properties
Configuring the T1 Buildout
Configuring T1 Byte Encoding
Configuring T1 Data Inversion
Configuring the T1 Frame Checksum
Configuring the T1 Remote Loopback Response
Configuring T1 Framing
Configuring T1 Line Encoding
Configuring T1 Loopback Capability
Configuring the T1 Idle Cycle Flag
Configuring T1 Start End Flags
Configuring Fractional T1 Time Slots
Example: Configuring Fractional T1 Time Slots
Configuring T3 Interfaces
Configuring T3 BERT Properties
Disabling T3 C-Bit Parity Mode
Configuring the T3 CSU Compatibility Mode
Configuring the T3 Frame Checksum
Configuring the T3 FEAC Response
Configuring the T3 Idle Cycle Flag
Configuring the T3 Line Buildout
Configuring the Channelized T3 Loop Timing
Configuring T3 Loopback Capability
Configuring T3 HDLC Payload Scrambling
Configuring the T3 Start End Flags
Examples: Configuring T3 Interfaces
Summary of Interface Configuration Statements
802.3ad
accept-data
accept-source-mac
access-concentrator
access-profile
accounting
accounting-profile
acfc
ack-delay-time
ack-max
acknowledge-retries
acknowledge-timer
action-red-differential-delay
activation-delay
address
advertise-interval
advertise-interval (APS)
advertise-interval (DLSw)
advertise-interval (VRRP)
aggregate
aggregate (Gigabit Ethernet CoS Policer)
aggregate (SONET/SDH)
aggregated-ether-options
aggregated-sonet-options
allow-any-vci
annex
aps
arp
atm-encapsulation
atm-options
atm-scheduler-map
authentication-key
authentication-key (APS)
authentication-key (VRRP)
authentication-type
auto-reconnect
auto-negotiation
backup-destination
backup-interface
backup-options
bandwidth
bandwidth-limit
bert-algorithm
bert-error-rate
bert-period
boot-command
broadcast
buildout
buildout (E3 or T3 over ATM Interfaces)
buildout (T1 Interfaces)
bundle
burst-size-limit
byte-encoding
bytes
callback
callback-wait-period
caller
calling-number
cbit-parity
cbr
cell-bundle-size
chap
cisco-interoperability
classifier
clear-dont-fragment-bit
clocking
clocking-mode
clock-rate
compatibility-mode
compression
compression (PPP Properties)
compression (Voice Services)
compression-device
connections
control-leads
control-polarity
control-signal
core-dump
cts
cts-polarity
current
dcd
dcd-polarity
dce
deactivation-delay
description
destination
destination (DLSw)
destination (IPCP)
destination (Routing Instance)
destination (Tunnels)
destination-class-usage
destination-profile
dialer
dialer-options
dial-options
dial-string
disable
dlci
dlsw
drop-timeout
ds0-options
dsl-options
dsr
dsr-polarity
dtr
dtr-circuit
dtr-polarity
e1-options
e3-options
encapsulation
encapsulation (Logical Interface)
encapsulation (Physical Interface)
encoding
epd-threshold
epd-threshold (Logical Interface)
epd-threshold (Physical Interface)
es-options
ethernet-policer-profile
ethernet-switch-profile
eui-64
facility-override
family
fastether-options
fast-interval
fcs
feac-loop-respond
filter
flow-control
f-max-period
force
forwarding-class
forwarding-class (ATM2 IQ Scheduler Maps)
forwarding-class (Gigabit Ethernet IQ Classifier)
fragment-threshold
framing
gigether-options
gratuitous-arp-reply
hello-timer
high-plp-max-threshold
high-plp-threshold
hold-time
hold-time (APS)
hold-time (DLSw)
hold-time (Physical Interface)
hold-time (SONET/SDH Defect Triggers)
hold-time (VRRP)
host
idle-cycle-flag
idle-time
idle-timeout
ieee802.1p
ignore-all
ilmi
inactivity-timeout
incoming-called-number
incoming-map
indication
indication-polarity
ingress-rate-limit
initial-route-check
input
input-list
input-priority-map
input-vlan-map
interface
interfaces
interface-switch
interface-type
interleave-fragments
inverse-arp
invert-data
ipsec-sa
isdn-options
keep-address-and-control
keepalives
key
l2tp-interface-id
lacp
linear-red-profile
linear-red-profiles
line-encoding
line-protocol
line-rate
link-layer-overhead
link-mode
link-speed
llc2
lmi
lmi-type
load-interval
load-threshold
local-mac
local-name
local-window
lockout
logical-routers
log-prefix
long-buildout
loopback
loopback (ADSL, DS0, E1/E3, SONET/SDH, SHDSL, and T1/T3)
loopback (Aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet)
loopback (Serial)
loop-timing
loss-priority
low-plp-max-threshold
low-plp-threshold
lsq-failure-options
mac
mac-address
mac-learn-enable
map
maximum-contexts
maximum-vcs
max-retry
minimum-links
mlfr-uni-nni-bundle-options
mode
monitor-session
mpls
mrru
mtu
multicast-dlci
multicast-vci
multicast-only
multilink-max-classes
multipoint
multipoint-destination
multiservice-options
n391
n392
n393
negotiate-address
neighbor
no-accept-data
no-auto-negotiation
no-cbit-parity
no-core-dump
no-feac-loop-respond
no-flow-control
no-gratuitous-arp-reply
no-gratuitous-arp-request
no-keepalives
no-long-buildout
no-loopback
no-mac-learn-enable
no-partition
no-partition (Channelized E1 IQ Interfaces)
no-partition (Channelized OC1 IQ Interfaces)
no-partition (Channelized OC12 IQ Interfaces)
no-partition (Channelized STM1 IQ Interfaces)
no-partition (Channelized T3 IQ Interfaces)
no-payload-scrambler
no-preempt
no-redirects
no-source-filtering
no-syslog
no-termination-request
no-translate-discard-eligible
no-translate-fecn-and-becn
no-unframed
no-z0-increment
oam-liveness
oam-period
oc-slice
open-timeout
operating-mode
optics-options
output
output-list
output-priority-map
output-vlan-map
overflow
overflow (Receive Bucket)
overflow (Transmit Bucket)
paired-group
partition
passive
passive-monitor-mode
path-trace
payload-scrambler
p-bit-timeout
peer
peer-unit
periodic
per-unit-scheduler
pfc
pic-type
plp1
plp-to-clp
point-to-point
policer
policer (CoS)
policer (Interface)
policer (MAC)
pool
pop
pop-all-labels
port
post-service-filter
pppoe-options
ppp-options
preempt
preferred
premium
premium (Output Priority Map)
premium (Policer)
preserve-interfaces
primary
primary (Address on Interface)
primary (AS PIC Interface)
priority
priority (DLSw)
priority (Schedulers)
priority (VRRP)
promiscuous-mode
protect-circuit
proxy
proxy-arp
push
queue-depth
queue-length
queues
rate
receive-bucket
receive-options-packets
receive-ttl-exceeded
red-differential-delay
redial-delay
redundancy-group
redundancy-options
remote
remote-loopback-respond
request
required-depth
revert-time
rfc-2615
routing-instance
rpf-check
rtp
rts
rts-polarity
rtvbr
sampling
scheduler-filter
scheduler-maps
secondary
serial-options
service
service-domain
service-filter
service-name
service-set
services
services-options
shaping
shdsl-options
short-sequence
snext
snr-margin
sonet-options
source
source-address-filter
source-class-usage
source-filtering
speed
spid1
spid2
stacked-vlan-tagging
start-end-flag
startup-silent-period
static-tei-val
swap
switching-mode
switch-type
syslog
syslog (Interfaces)
syslog (Monitoring)
t1-options
t1-time
t2-time
t310
t391
t392
t3-options
tag-protocol-id
tag-protocol-id (TPIDs Expected to Be Sent or Received)
tag-protocol-id (TPID to Rewrite)
tei-option
threshold
timeslots
tm
tm-polarity <